Test Instrument Miscellaneous Parts

Expand The Power Of The World's Most Rugged, Accurate Handheld Test Tools With Flukeview? Forms Documenting Software. To Address The Increasing Demands For Reporting And Documentation, Fluke Presents Flukeview Forms Documenting Software. Flukeview Forms Increases The Power Of Your Fluke Tool By Enabling You To Document, Store And Analyze Individual Readings Or Series Of Measurements, Then Convert Them Into Professional-looking Documents.

Ground/earth Cable Reel 25m Wire

Ground/earth Cable Reel 50m Wire

Geo Ground Earth Stake

Geox Connector Cable; For Selective Clamp; Geox Probe Connection Cable; Connects To Selective Clamps; For Use With The Fluke 1623-2 And 1625-2 Earth Ground Testers

For Use With Fluke T6 Tester.

Ac Current Clamp-on Probe, Model: I1000, Voltage Rating: 600 Vac Maximum, Amperage Rating: 1000 Amp, 2000 Amp (maximum Non-destructive), 0.1 Amp (lowest Measureable Current), Measuring Range: 10/100/1000 Amp At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 Amp At Continuous Current, Accuracy: 1 Pct Plus 1 Amp (48 - 65 Hz) ( Percentage Reading Plus Floorspec), Enclosure: Ip40 (iec 529), Diameter: 54 Mm Maximum Conductor, Length: 1.6 Mr Output Cable, Operating Temperature: -10 To 50 Deg C, Storage Temperature: -40 To 71 Deg C, Dimensions: 4.37 In Width X 8.5 In Length X 1.77 In Depth, Cat Iii 600 V, Cat Iv 300 V, For Use With Multimeters With Optional Pm9081/001 Bnc/banana Adapter And Oscilloscopes

Special Value Kit For Electrical Professional Who Is Looking To Add On Dc And Ac Current Measurement Capabilities To Their Dmm.

Fluke Current Clamps Are The Ideal Tools To Extend The Current Ranges Of Multimeters. Is A Single Range 200a Ac Current Clamp With Current Output Via Safety Shrouded Banana Plugs. Is Compatible With Most Fluke Multimeters Or Any Other Current Measurement Device That Accepts Shrouded Banana Plugs.

Three Ranges: 20a, 200 A & 2000 A, 100 Mv/a, 10 Mv/a & 1 Mv/a Output; Ideal For Current Measurement On Thick And Hard To Reach Conductors Without Breaking The Circuit; Maximum Conductor Diameter 178 Mm

Current Clamp Is Based On Hall Effect Technology For Use In Measurement Of Both Dc And Ac Current. May Be Used In Conjunction With Multimeters, Recorders And Other Suitable Recording Instruments For Accurate Non-intrusive Current Measurement.

Ac Current Clamp With Bnc Output, Amperage Rating: 40 Amp: 0.5 - 40 Amp, 400 Amp: 5 - 400 Amp, Voltage Rating: 1000 Vac, Frequency Rating: 45 - 400 Hz, Operating Temperature: 0 - 50 Deg C, Dimensions: 5.09 In Length X 2-3/4 In Width X 1.18 In Height, 2.5 Mr Output Cable Length, Accuracy: 40 Amp: 2 Pct Plus 0.015 Amp, 400 Amp: 2 Pct Plus 0.04 Amp, 5 - 10 Khz Typical Bandwidth, 32 Mm Maximum Conductor Size, Csa And Ce Certified, Cat Iv 600 V, Cat Iii 1000 V

Fluke Current Clamps Are The Ideal Tools To Extend The Current Ranges Of Fluke Tools.

A Pack Of 3 Pieces Of The I5s Current Clamps, Specially Configured To Provide Low Current Accuracy While Taking Measurements On Secondary Current Transformers. This Cost-saving 3-pack Is Perfect For Use With 3-phase Tools Such As The Fluke 434 Or Fluke 435.

Ac Current Clamp Probe, Voltage Rating: 600 Vrms/vdc, Amperage Rating: 1500 Amp Rms (50/60 Hz) Maximum Non-destructive, Measuring Range: 800 Amp Rms Nominal Current, 100 Milamp - 800 Amp Rms At Continuous Current, Accuracy: Plus/minus 1 Pct Of Reading, Diameter: 54 Mm Maximum Conductor, Length: 1.6 Mr Output Cable, Impedance: Load: Less Than Or Equal To 20 Ohm, Operating Temperature: -10 To 55 Deg C, Storage Temperature: -40 To 70 Deg C, Operating Humidity: 15 - 85 Pct (non-condensing), Cat Iii 600 V Rated, C/us Csa Certified, Ce Certified, N10140 Confirmed, En 61010-1: 2001, En 61010-2-032: 2002, En 61010-031: 2002, En 61326 :1998 And A1, A2 And A3

Suregrip? Kit With Probe Light And Probe Extender

48" Long; Up To 121kv; Accessory Attachment For The Tic-300 Pro Tic Tracer Ac Voltage Detector

Test Leads With Alligator Clips (red, Black, Green)

Test Lead Set, Included: One Pair (red, Black) 1.5 Mr Long Silicone Test Leads With Right Angle Shrouded Banana Plug, Lantern Tip (removable) For Use With European Wall Sockets (4 Mm), Lantern Tip Can Be Removed For Easy Access To Terminal Blocks (2 Mm), 10 Amp Maximum Current, Cat Ii 1000 V, Cat Iii 1000 V And Cat Iv 600 V Rated, For Use With Gs38 T120 Voltage And Continuity Tester

Basic Electronic Test Lead Set

Replacement Test Lead Set For The Fluke 1550b Megaohmmeter. 3 Test Leads (red, Black, Green) Connected To Low-leakage Probes. 3 Alligator Clips (red, Black, Green). Maximum Jaw Opening: 26mm (1"). Length (lead Only): 2.6m (8.6'). Cat Ii 1000 V, Cat Iii 600 V, 5kv Dc Max (probes). Cat Ii 1000 V, Cat Iii 600 V, 20 Amps (alligator Clips).

1 Pair (red, Black) Multi Stacking 4mm Banana Plug Patch Cords. Nickel Plated Banana Plugs. 24" (61cm) Long Pvc Insulated Leads. 30v Rms Or 60v Dc, 8a.

Complete Set Of Test And Measurement Accessories Designed Especially For Automotive Specialists. Use The Sharp Stainless Steel Probes To Contact The Wire Conductor Or Pinpoint Tests On A Circuit Or Relay, And The Large Jaw Alligator Clips To Get A Good Gr

One Pair (red, Black) Of Slender Probe Bodies For Probing Closely Spaced Or Recessed Terminals. Hard Stainless Steel Probe Tips. 2mm Diameter Tip For Electronics Work. Also Compatible With Ac72 Cat Iv 600v, Cat Iii 1000v, 10 A Rating. Ul Listed. 1 Year Warranty.

Slim Reach Test Probes, 4mm Diameter Hard Stainless Steel Probe Tips

Electronic Test Probes Recommended For Use With Tl222 And Tl224

Insulation Piercing Clip Set, Voltage Rating: 60 Vdc, For Use With Fluke Tlk281 Suregrip Automotive Test Lead Kit

Replacement Thermocouple, Klein Tools Offers The Thermocouple Replacement For Use With A Number Of Klein Multimeters And Clamp Meters.

Replacement Bulb For Continuity Tester, Replacement Bulb For Cat. No. 69133.

Magnetic Hanger, Strong Magnet Attaches Securely To Metal Surfaces For Hands-free Use.

Multimeter Carrying Case, Constructed Of Black 600 Denier Nylon

Circuit Breaker Finder Accessory Kit, For Use With Et300 Digital Circuit Breaker Finder.

Includes - TP81 Insulation Piercing Probes Set of five TP40 Automotive Back Probe Pins. TL224 Suregrip Silicone Test Leads. TP220 Suregrip Test Probes. AC220 Suregrip Plunger Style Alligator Clips. AC285 Suregrip Alligator Clips. C280 Suregrip Hook Clips. Handy Fluke carrying case. TP81 and TP40 rated to 60 V dc; all others rated to CAT III 1000 V, CAT IV 600 V