How can we get better? Print

Cac Current Clamp 600 Vrms

Ac Current Clamp Probe, Voltage Rating: 600 Vrms/vdc, Amperage Rating: 1500 Amp Rms (50/60 Hz) Maximum Non-destructive, Measuring Range: 800 Amp Rms Nominal Current, 100 Milamp - 800 Amp Rms At Continuous Current, Accuracy: Plus/minus 1 Pct Of Reading, Diameter: 54 Mm Maximum Conductor, Length: 1.6 Mr Output Cable, Impedance: Load: Less Than Or Equal To 20 Ohm, Operating Temperature: -10 To 55 Deg C, Storage Temperature: -40 To 70 Deg C, Operating Humidity: 15 - 85 Pct (non-condensing), Cat Iii 600 V Rated, C/us Csa Certified, Ce Certified, N10140 Confirmed, En 61010-1: 2001, En 61010-2-032: 2002, En 61010-031: 2002, En 61326 :1998 And A1, A2 And A3
Brand
Fluke
Mfr. Part#
I800
Campbell Part#
FLUI800
Qty:
Min. Qty:
1 ea
Qty Intervals:
1 ea
$406.26 ea
Est. Lead Time: 20 Bus. Days
More Information
AccuracyPlus/Minus 1 PCT Of Reading
Amperage Rating1500 AMP RMS (50/60 HZ) Maximum Non-Destructive
Diameter54 MM Maximum Conductor
Length1.6 MR Output cable
Measuring Range800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current
Special FeaturesThe model i800 is a clamp-on AC current probe designed to extend the current measuring capability of a digital multimeter to 800 AMP AC; The clamp is compatible with a DMM that accepts 4 MM shrouded banana plugs and has an AC milliamp range; Measures AC current from 100 MILAMP - 800 AMP RMS; 30 HZ - 10 KHZ frequency range; Accepts up to 54 MM diameter conductor size; 1000:1 conversion factor for easy calculation; Rugged positive action design; Lowest measureable current: 100 MILAMP; Useable frequency: 30 HZ - 10 KHZ (-3 DB); Output level(s): 1 MILAMP/A; Lead connector: Shrouded banana plugs; Phase shift at 2 KHZ: Plus/minus 1 DEG typical; Bandwidth: 30 HZ - 10 KHZ (-3 DB); Overload conditions: Operation above 1200 AMP should be limited to frequencies below 1 KHZ; Duty cycle: 1500 AMP at 50/60 HZ for 1 HR, 33 PCT duty cycle (20 MINT On, 40 MINT Off); Pollution degree: 2
StandardCAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
Voltage Rating600
Specification Sheet
Search engine powered by ElasticSuite