Large Ac Current Probe, 600v Ac Voltage, 1000a Rms Current, 5 Hz To 100 Khz
Ac Current Clamp-on Probe, Model: I1000, Voltage Rating: 600 Vac Maximum, Amperage Rating: 1000 Amp, 2000 Amp (maximum Non-destructive), 0.1 Amp (lowest Measureable Current), Measuring Range: 10/100/1000 Amp At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 Amp At Continuous Current, Accuracy: 1 Pct Plus 1 Amp (48 - 65 Hz) ( Percentage Reading Plus Floorspec), Enclosure: Ip40 (iec 529), Diameter: 54 Mm Maximum Conductor, Length: 1.6 Mr Output Cable, Operating Temperature: -10 To 50 Deg C, Storage Temperature: -40 To 71 Deg C, Dimensions: 4.37 In Width X 8.5 In Length X 1.77 In Depth, Cat Iii 600 V, Cat Iv 300 V, For Use With Multimeters With Optional Pm9081/001 Bnc/banana Adapter And Oscilloscopes
Brand
Fluke
Mfr. Part#
I1000S
Customer Part#
Campbell Part#
FLUI1000S
| Accuracy | 1 PCT Plus 1 AMP (48 - 65 HZ) (Percentage Reading Plus Floorspec) |
|---|---|
| Amperage Rating | 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current) |
| Application | For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes |
| Diameter | 54 MM Maximum Conductor |
| Enclosure | IP40 (IEC 529) |
| Measuring Range | 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current |
| Model | i1000 |
| Special Features | The Fluke i1000s is a clamp-on AC current probe designed to expand oscilloscope applications in industrial and power environments; Ideal for measuring distorted current waveforms and harmonics; Allows accurate measurement of currents from 100 MILAMP - 1000 AMP RMS, 5 HZ - 100 KHZ without breaking into the circuit; A passive filter eliminates noise and ring on rapidly rising DI/DT waveform, ensuring accurate screen displays; Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector; Useable frequency: 5 HZ - 100 KHZ; One year warranty; Output level(s): 100/10/1 MILV/AMP; BNC adapter; Relative humidity: 0 - 85 PCT (10 - 30 DEG C), 0 - 75 PCT (30 - 40 DEG C); 0 - 45 PCT (40 - 50 DEG C); Altitude: 2000 MR (operating); Output cable: 63 IN PVC-insulated lead with insulated BNC connector; Drop test: 1 MR per IEC 68-2-32; Mechanical shock: 100 G per IEC 68-2-27; Vibration: 5/55/5 HZ, no less than 1/4 MM per IEC 68-2-6 |
| Standard | CAT III 600 V, CAT IV 300 V |
| Voltage Rating | 600 VAC Maximum |
Specification Sheet