Cordless Tools
-
Cordless Drills (30)
-
Cordless Impact Wrenches (76)
-
Cordless Rotary Hammers (16)
-
Cordless Angle Grinders (28)
-
Cordless Circular Saws (11)
-
Cordless Combination Kits (41)
-
Cordless Hammer Drills (13)
-
Cordless Grease Guns (9)
-
Cordless Band Saws (12)
-
Cordless Reciprocating Saws (16)
-
Cordless Jig Saws (7)
-
Cordless Cutters (38)
-
Cordless Crimper & Accessories
-
Cordless Jobsite Radios (9)
-
Cordless Tool Batteries (47)
-
Cordless Tool Battery Chargers (26)
-
Carrying Bags & Cases (6)
-
Cordless Air Compressors (4)
-
Cordless Caulk Guns (2)
-
Cordless Chop & Cut-Off Saws (4)
-
Cordless Die Grinders (5)
-
Cordless Knockout Tools (2)
-
Cordless Magnetic Core Drill (1)
-
Cordless Plumbing Tools (34)
-
Cordless Ratchets (17)
-
Cordless Screwdrivers (10)
-
Cordless Specialty Tools (112)
-
Cordless Vacuums, Blowers and Fans (15)
- 1/0 AWG - 750 MCM Aluminum Bushing Kit For M12-M18 Cable Strippers, THHN/XHHW, 11 Dies, Carrying CaseM12 and M18 Cable Strippers provide the most consistent strips and best access. Our MILWAUKEE Bushings are individually engineered to give you safer and cleaner strips on all sizes specific to each cable. Every cable stripper bushing features industry-standard colors to indicate wire size. Additionally, the wire size, material, and jacket type are clearly marked on each bushing for easier identification. These quick-change bushings are compatible with both our M18 and M12 cable strippers, allowing you to perform faster stripping on either battery platform.Detailed Description LessBrandMilwaukeeMfr. Part#49-16-BKITACustomer Part#Campbell Part# MIL49-16-BKITA
- M18 Fuel 1 Inch D-Handle Cordless Impact Wrench, Brushless Motor with One Key Connectivity (Bare Tool Only)Removes up to 200 1-1/4" Bolts on a single High output battery. One Key allows customization and tracking of the tool. Comes with 360 degree adjustable and removable side handle.Detailed Description LessBrandMilwaukeeMfr. Part#2868-20Customer Part#Campbell Part# MIL2868-20
- M18 Fuel 1 Inch D-Handle Cordless Impact Wrench Kit, Brushless Motor with One Key ConnectivityRemoves up to 200 1-1/4" Bolts on a single High output battery. One Key allows customization and tracking of the tool. Comes with HD 12.0 amp hour Battery (48-11-1812), M18 & M12 rapid charger, 360 degree adjustable and removable side handle.Detailed Description LessBrandMilwaukeeMfr. Part#2868-22HDCustomer Part#Campbell Part# MIL2868-22HD
- M18 Fuel 1 Inch D-Handle Cordless Impact Wrench, Anvil High Torque Brushless Motor with One Key Connectivity (Bare Tool Only)Great for tight spaces like large truck tire wheel wells. One Key allows customization and tracking of the tool along with 4 driver control modes. Enable lug nut mode to prevent over torque and better control. Comes with 360 degree adjustable and removable side handle.Detailed Description LessBrandMilwaukeeMfr. Part#2869-20Customer Part#Campbell Part# MIL2869-20
- M18 Fuel 1 Inch D-Handle Cordless Impact Wrench Kit, Anvil High Torque Brushless Motor with One Key ConnectivityOur M18 FUEL™ 1in. D-Handle Extended Anvil High Torque Impact Wrench w/ ONE-KEY™ Kit is the world’s first cordless 1” D-Handle High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 2,000ft.-lbs of nut-busting torque and 1,900ft.-lbs of fastening torque, making this the world's most powerful cordless impact wrench, enabling you to complete the most demanding applications. With the runtime for up to 120 lug nut removals and installations on a single HIGH OUTPUT™ HD 12.0Ah battery, this portable impact wrench provides unmatched performance. Lug Nut Mode, which can be enabled through the ONE-KEY™ app, prevents the over-torque of lug nuts by automatically shutting off the tool, providing more control. The REDLINK PLUS™ Intelligence ensures you achieve maximum performance and protects the High Torque Impact Wrench against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, providing this high torque cordless impact wrench with more work per charge and more work over the life of the pack. A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use. The 4-Mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the MILWAUKEE® High Torque Impact Wrench. The ONE-KEY™ Technology allows you to customize, track, and manage the impact wrench with the ability to set a repeatable torque output for maximum control.Detailed Description LessBrandMilwaukeeMfr. Part#2869-22HDCustomer Part#Campbell Part# MIL2869-22HD
- M18 REDLITHIUM XC5.0 Extended Capacity Battery - 10 PackThe M18 REDLITHIUM XC5.0 10-Pack includes (10) M18 5.0Ah Battery Packs that deliver up to 2.5x more run-time than standard lithium. The packs deliver up to 20% more power than standard lithium which means faster application speed and increased application range for end users. With REDLITHIUM Protection the packs have industry leading protection against vibration/impact, water, and heat. M18 packs also have forward and backward compatibility with 125+ M18 tools.Detailed Description LessBrandMilwaukeeMfr. Part#48-11-1851Customer Part#Campbell Part# MIL48-11-1851
- Jobsite Bluetooth Speaker. Rechargeable. Wireless Connectivity up to 32 Feet or Wired Auxiliary Input. Aux Cable Included. 10 Hour use per charge. Magnetic StrapSpecifications: Type:Bluetooth Wireless Speaker. Application: Speaker, Speakerphone. Special Features:Wireless, Magnetic Hanging Strap, Speakerphone. Overall Length:4.1 Inch. Overall Height: 4.2 Inch. Overall Width: 1.6 Inch. Material:Polycarbonate/Thermoplastic Polyurethane. Battery Life: 10 Hours. Charging Time: 5 to 6 Hours. Color: Orange, Black.Detailed Description LessBrandKleinMfr. Part#AEPJS2Customer Part#Campbell Part# KLEAEPJS2
- M12 Cordless Plastic Pipe Shear Kit. Includes M12 Lithium-ion Battery, Charger, & Carrying Case.Plastic Pipe Shear can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12 lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12 plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12 REDLITHIUM CP1.5 battery pack, an M12 Lithium-Ion battery charger, and a carrying case.Detailed Description LessBrandMilwaukeeMfr. Part#2470-21Customer Part#Campbell Part# MIL2470-21
- M12 Cordless Lithium-Ion Rotary ToolThis compact, portable and powerful cutoff solution for the professional offers up to 10X longer life and 10 percent more speed. The M12 Cordless Rotary Tool, which integrates high-performance motor design, optimized electronics and redlithium battery technology for exceptional power and durability. This compact, versatile tool offers a variable-speed of 5,000-32,000 RPM and a collet thats compatible with all 1/32 - 1/8 inch shank accessories for thousands of cutting, grinding, sanding and polishing solutions. A variable-speed dial offers fluid control, and the 1.3-pound weight permits hours of comfortable use. Grinder-style exhaust ports and front-bearing protection help this tool exceed performance and endurance expectations.Detailed Description LessBrandMilwaukeeMfr. Part#2460-20Customer Part#Campbell Part# MIL2460-20
- M12 Fuel Oscillating Multi-Tool. Includes Open-lok 1-3/8 Inch HCS Wood Blade and Sanding PadM12 Fuel Oscillating Multi-Tool Kit generates the fastest 12V cut speed, lowest full-tool vibration, and delivers tool-free blade change for faster accessory changes and no misplaced tools. The Powerstate Brushless Motor delivers 10,000 to 20,000 OPM while maintaining its speed under load. The vibration isolating tool design minimizes vibration making your cuts more comfortable with less fatigue. Redlink Plus Intelligence ensures unmatched levels of performance, protection, and compatibility. Has a 12-Setting Dial allowing you to adjust the speed to the application, and an integrated LED light for maximum visibility.Detailed Description LessBrandMilwaukeeMfr. Part#2526-20Customer Part#Campbell Part# MIL2526-20
- M12 3/8 Inch Drill/DriverM12 Cordless Lithium-Ion 3/8 Inch Drill/Driver delivers 275 in-lbs of torque and 0-400/0-1,500 RPM. Its compact, lightweight and durable design means greater comfort and efficiency on the jobsite. The all-metal single-sleeve ratcheting chuck offers superior bit grip, so you wont have to stop for bit retightening or lost bits. The onboard LED light and fuel gauge help you increase productivity and avoid interruptions.Detailed Description LessBrandMilwaukeeMfr. Part#2407-20Customer Part#Campbell Part# MIL2407-20
- M12 3/8 Inch Drill/Driver Kit. Includes two M12 Redlithium CP1.5 Battery Packs, Charger and Carrying Case.M12 Cordless 3/8 Inch Drill/Driver is the only tool in its class that has an all-metal locking chuck. The powerful compact cordless drill driver delivers 275 in-lbs of torque and 0-400/0-1,500 RPM. Its compact, lightweight and durable design offers you greater comfort and efficiency on the job site. The all-metal single-sleeve ratcheting chuck gives you superior bit grip so you won't have to stop for bit retightening or risk losing bits. The drill driver features an onboard LED light and fuel gauge helping you increase productivity and avoid interruptions. In addition to the compact drill driver, the kit includes two M12 batteries, a 30-minute charger and carrying case.Detailed Description LessBrandMilwaukeeMfr. Part#2407-22Customer Part#Campbell Part# MIL2407-22
- Responsive Laser Alignment TargetResponsive Laser Alignment Target provides the fastest, most visible alignment feedback when setting lasers with a point on the floor or checking an offset. The X design provides responsive centering feedback that guides your line to the center, making the alignment process faster, while the high visibility illumination makes it easy to see. This laser X target also features a wide magnetic base that is perfect for floor use or magnetically attaching to ferrous surfaces. The Responsive Laser Alignment Target is compatible with all green lasersDetailed Description LessBrandMilwaukeeMfr. Part#48-35-1111Customer Part#Campbell Part# MIL48-35-1111
- 360 Degree Laser Bracket360 Degree Laser Bracket is an adaptable laser attachment that contributes to the fastest laser setup. With the Multi-Plane Rotational Adjustment, you can easily mount lasers on flat, horizontal, or vertical materials. The amplified rare earth magnets provide a strong hold onto metal surfaces. The strong magnets combined with integrated screw and nail hang holes make setup easy and efficient in any environment. The Laser Bracket Mount also features a precision vertical adjustment that makes aligning horizontal lines much faster. The bottom has 1/4-20 Inch threading that easily attaches to most tripods. The 360 Degree Laser Bracket is compatible with all Milwaukee Line & Plane LasersDetailed Description LessBrandMilwaukeeMfr. Part#48-35-1311Customer Part#Campbell Part# MIL48-35-1311
- Rechargeable Personal Jobsite FanPersonal fan has multiple mounting options perfect for the job site. Arm base rotates and cage spins 360 degrees to aim airflow in any direction. Incorporated into the base are two powerful magnets and a hang hole for mounting. Base forms a strong clamp for attaching to studs or conduit. Features two long-lasting fan modes: Low for 9 hours; High for 5 hours. LED battery gauge indicates charge level. Charges via USB-C, charging cable includedDetailed Description LessBrandKleinMfr. Part#PJSFM1Customer Part#Campbell Part# KLEPJSFM1
- M18/M12 Vehicle Charger DC OutletCharge On The Go. The M18 & M12 Vehicle Charger allows users to charge battery packs on the go from the DC Outlet of any vehicle. The charger provides full system compatibility and accepts all M18 and M12 batteries.Detailed Description LessBrandMilwaukeeMfr. Part#48-59-1810Customer Part#Campbell Part# MIL48-59-1810
- M18 Fuel 7-1/4 Inch Circular Saw Kit. Includes: Tool, HD12.0 Battery, Charger, Blade, Blade Wrench & Contractor Bag.M18 Fuel 7-1/4 Inch Circular Saw from Milwaukee generates 15Amps corded power, cuts faster than a 15Aamp corded saw and gives users up to 750 cuts per charge. The Powerstate Brushless Motor provides 5,800 RPM and higher speeds under load for corded cutting performance. Redlink Plus intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 HD12.0 battery delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.Detailed Description LessBrandMilwaukeeMfr. Part#2732-21HDCustomer Part#Campbell Part# MIL2732-21HD
- M18 Fuel 7 / 9 Inch Large Angle Grinder Tool Only9 Inch grinding capacity. Providing high performance, advanced ergonomics & legendary durability, this grinder is designed to complete the toughest grinding, surface preparation, and cutting applications with any 7 - 9 inch accessory. The Powerstate Brushless Motor provides 6,600 RPM and higher speeds under load for corded grinding/cutting performance. Redlink Plus intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 Redlithium HD12.0 battery (not included) delivers unmatched run-time in all applications. Tool-free accessory changes using the Fictec nut and guard adjustments mean less downtime during work.Detailed Description LessBrandMilwaukeeMfr. Part#2785-20Customer Part#Campbell Part# MIL2785-20
- M18 Fuel 7-1/4 Inch Circular Saw Rear Handle Tool OnlyThe cordless circular saw has an electric blade break, LED work light, and all magnesium guards and shoe, keeping you productive and providing you the durability to handle the toughest job site conditions. A multi-sized rafter hook allows you to store the handheld circular saw on different materials and provide you with up to 570 cuts per charge with our M18 Redlithium HD12.0 battery attached. The Powerstate Brushless Motor provides this worm drive style saw with 5,800 RPM and higher speeds under load, giving you corded cutting performance. Redlink Plus Intelligence ensures you achieve maximum tool performance and protects your circ saw from overload, overheating and over discharge. Our M18 Redlithum HD12.0 battery (not included) is compatible with all M18 tools, runs 50 percent cooler, and delivers you with unmatched run times and 50 percent more powerDetailed Description LessBrandMilwaukeeMfr. Part#2830-20Customer Part#Campbell Part# MIL2830-20
- M18 Fuel 7-1/4 Inch Circular Saw Rear Handle Kit Includes: M18 HD12.0 Battery Pack, Charger and Contractor BagThe cordless circular saw has an electric blade break, LED work light, and all magnesium guards and shoe, keeping you productive and providing you the durability to handle the toughest job site conditions. A multi-sized rafter hook allows you to store the handheld circular saw on different materials and provide you with up to 570 cuts per charge with our M18 Redlithium HD12.0 battery attached. The Powerstate Brushless Motor provides this worm drive style saw with 5,800 RPM and higher speeds under load, giving you corded cutting performance. Redlink Plus Intelligence ensures you achieve maximum tool performance and protects your circ saw from overload, overheating and over discharge. Our M18 Redlithum HD12.0 battery is compatible with all M18 tools, runs 50 percent cooler, and delivers you with unmatched run times and 50 percent more powerDetailed Description LessBrandMilwaukeeMfr. Part#2830-21HDCustomer Part#Campbell Part# MIL2830-21HD
- M18 Fuel Cordless 8 Inch Metal Cutting Circular Saw Tool OnlyDelivers up to 120 feet of cutting corrugated decking per charge. Powerstate Brushless Motor provides 4,000 RPM and faster cutting performance than its corded competitors. Redlink Plus Intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. When paired with our M18 Redlithium XC8.0 battery (not included), you get 50 percent more power while running 50 percent cooler than our M18 XC Batteries. This metal circular saw has a cut capacity of 2-9/16 Inch for tackling demanding applications at a larger capacity.Detailed Description LessBrandMilwaukeeMfr. Part#2982-20Customer Part#Campbell Part# MIL2982-20
- M18 Fuel Cordless Mud Mixer with 180 Degree Rotating Handle Tool OnlyThe Powerstate Brushless motor it has the power to mix heavy compounds, such as concrete and mortar. Using our Redlink intelligence the variable speed dial, the variable speed trigger and the lock on button combine to give the user ultimate control for a consistent mix and cleaner working environment. With the M18 Redlithium battery (not included) the user can mix up to 15, five gallon buckets on one 5.0Ah battery. The 180 degree adjustable handle is designed to allow every user to optimize the handle position for their comfort.Detailed Description LessBrandMilwaukeeMfr. Part#2810-20Customer Part#Campbell Part# MIL2810-20
- M18 Fuel 1/2 Inch Compact Impact Wrench with Pin Detent and One-Key Support. Tool OnlyFeatures a Powerstate Brushless Motor not only provides unmatched power, but also greater efficiency, delivering up to 25 percent more run-time than the leading competitors. Redlink Plus Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. Redlithium Batteries (not included) deliver more work per charge and more work over the life of the pack than competitive batteries on the market.Compatible with One-key, this is the industrys first Impact Wrench that wirelessly connects to a smart phone to Customize, Track and Manage a tools performance and location.Detailed Description LessBrandMilwaukeeMfr. Part#2759-20Customer Part#Campbell Part# MIL2759-20
- M18 Fuel 1/2 Inch Compact Impact Wrench with Friction Ring Tool OnlyThe most compact in its class, delivering you the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.9 Inch in length with a Powerstate Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. Has tri-LEDs that surround the anvil to deliver you brighter light with fewer shadows. 4-Mode Drive Control offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-off control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Redlink Plus Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 Redlithium battery pack (not included) fits M18 tools, delivering more work per charge and more work over the life of the pack.Detailed Description LessBrandMilwaukeeMfr. Part#2855-20Customer Part#Campbell Part# MIL2855-20
- M18 Force Logic 6 Ton Tool Kit. 1/2 thru 4 Inch Exact Punches and Dies. Includes: M18 CP2.0 Battery Pack, Charger and Carrying CasePowerful enough to punch up to 4 inch holes in 14 gauge mild steel. It is also 40 percent lighter weight than other 6T knockouts available. The electrical knockout tool has a compact, right angle design that delivers you the best clearance in tight spaces. Our Quick Connect Alignment System provides you with easy set-up without the weight of the tool and speeds up repetitive punching. The tool is compatible with all our Milwaukee Exact punches and dies. The knockout dies are rated for both mild and stainless steel punching. Vivid red cross hairs provide you with accurate alignment and slug removal ports provide optimal slug removal.Detailed Description LessBrandMilwaukeeMfr. Part#2677-23Customer Part#Campbell Part# MIL2677-23
- M18 Fuel Drywall Screw Gun Tool OnlyFeatures Auto Start functionality and delivers up to 3X Longer Run Time .The Powerstate Brushless motor spins at 4,500 RPMs resulting in faster productivity. With Redlink Plus Intelligence, Milwaukee's AUTO START feature automatically starts the motor on contact with drywall providing less noise between screws and 3X longer run time. The M18 FUEL Drywall Screw Gun delivers the balance and weight desired by professionals for all day use. Battery Pack not included.Detailed Description LessBrandMilwaukeeMfr. Part#2866-20Customer Part#Campbell Part# MIL2866-20
- M18 Fuel Drywall Screw Gun Kit Includes: 2x M18 XC5.0 Battery Packs, Charger and Contractor BagFeatures Auto Start functionality and delivers up to 3X Longer Run Time .The Powerstate Brushless motor spins at 4,500 RPMs resulting in faster productivity. With Redlink Plus Intelligence, Milwaukee's AUTO START feature automatically starts the motor on contact with drywall providing less noise between screws and 3X longer run time. The M18 FUEL Drywall Screw Gun delivers the balance and weight desired by professionals for all day use.Detailed Description LessBrandMilwaukeeMfr. Part#2866-22Customer Part#Campbell Part# MIL2866-22
- M18 Fuel Cordless 7 Inch Variable Speed Polisher Tool OnlyTool delivers corded performance that allows users to power through the most demanding applications. At more than 1 lb. lighter than corded, and the ability to deliver total control through a variable speed dial and trigger. Can complete a full size car on one charge when working on moderate to good paint. Is equipped with a rubber over mold front housing to protect the paint from scratches in use as well as a removable dust cover to protect the motor and electronics from wool fibers and residue.Detailed Description LessBrandMilwaukeeMfr. Part#2738-20Customer Part#Campbell Part# MIL2738-20
- M18 Fuel Cordless Oscillating Multi-Tool Kit. Includes: M18 XC5.0 Battery Pack, Charger and Contractor BagPowerstate Brushless Motor delivers 10,000 to 20,000 OPM with an aggressive 4.2-degree oscillation angle to deliver the fastest cuts over the competition. The cordless multi-tool also gives you the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, pushing the limits of what a multipurpose oscillating tool can do. Vibration dampening technology delivers the lowest full tool vibration, letting you make cuts more comfortably with less fatigue.Redlink Plus Intelligence ensures you achieve unmatched levels of performance, protection, and compatibility. The M18 Redlithum XC5.0 battery delivers more work per charge than competitive batteries on the market when used with the multitool. Has a 10-Setting Dial with an additional Auto-Load Feature, allowing you to adjust the speed to the application. An integrated 180-degree LED light provides maximum visibility in low-light situations.Detailed Description LessBrandMilwaukeeMfr. Part#2836-21Customer Part#Campbell Part# MIL2836-21
- M12 Fuel 1/4 Inch Right Angle Die Grinder (Tool Only)0.3 Horsepower Motor Output. 4-Mode Speed Control. Greater Mobility and Access. Optimum performance with 2 Inch Accessories. Powerstate Brushless Motor Technology. M12 Redlithium Battery Technology (battery not included)Detailed Description LessBrandMilwaukeeMfr. Part#2485-20Customer Part#Campbell Part# MIL2485-20
- Gator Insulated Cable Cutter 35 millimeter. Application: Copper and Aluminum. Cutting Range: 1000 KCMIL. 1000 Volt Rated. Includes 120 Volt Charger and Two 4.0Ah BatteriesBrush guarded head - helps avoid accidental contact with conductors. Tri-insulation barrier - Provides three (3) layers of protection (Patent Pending). 360 Degree Rotating Head. Double -tap safety feature option -Prevents unintentional operation. Bluetooth communication Connects with Greenlee i-press App. Equipped with Intelli-crimp technologyDetailed Description LessBrandGreenleeMfr. Part#ESC35HVX11Customer Part#Campbell Part# GREESC35HVX11
- M18 Fuel 1 Inch SDS Plus Rotary Hammer with Hammervac 1 Inch Dedicated Dust Extractor Includes: 2x XC6.0 Battery Packs and M18/M12 Rapid ChargerPowerstate Brushless Motor. Redlink Plus Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging XC6.0 Battery Pack provides 50 percent more power and runs 50 percent cooler vs XC battery packs. 3 Mode: Rotary Hammer, Hammer Only, Rotary Only. 2 feet/pounds Impact Energy. Anti-Vibration Systems. 1,330 Revolutions Per Minute . 4,800 Blows Per Minute. Dust Extractor utilizes the same replaceable certified HEPA filter which filters 99.97 percent of all particles greater than 0.3m, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offers easy and precise adjustments. The dust extractor allows full OSHA Table One Compliance when drilling up to 1 inch diameter and 6 inch in depth. This extractor features autopulse Filter Cleaning Mechanism that automatically cleans the filter after each use, ensuring you drill more effectively and for longer before needing to empty the dust box. The dust box comes equipped with a vacuum port that allows you to suction out the dust with a large vacuum or dust extractor (such as the 8960-20) instead of dumping the dust out into a trash receptacle, ensuring minimal exposure.Detailed Description LessBrandMilwaukeeMfr. Part#2912-22DECustomer Part#Campbell Part# MIL2912-22DE
- W Style Crimping Die for Use with Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground ConnectorsRequire UAW Adapter When Used With ECCXL Tools. Requires CJD3, CJD3BG, or CJD30 Jaws When Used With EK628L Tools. 4 AWG Solid to 4 AWG Stranded, 6 AWG Solid To 4 AWG Stranded, 6 AWG Solid To 6 AWG Stranded, Size 8 AWG Solid To 8 AWG Stranded WireDetailed Description LessBrandGreenleeMfr. Part#KD6-10Customer Part#Campbell Part# GREKD6-10
- M18 and M12 Dual Rapid Battery ChargerCharges battery packs up to 40 percent faster, reducing your downtime and maximizing your productivity. The battery charger accepts all MILWAUKEE M18 and M12 batteries, providing a charging upgrade for both systems. The charger features REDLINK Intelligence and communicates directly with your batteries to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80 percent charge, providing you with the confidence that a substantial amount of work can be completed without having to wait for a full charge.Detailed Description LessBrandMilwaukeeMfr. Part#48-59-1808Customer Part#Campbell Part# MIL48-59-1808
- M18 Fuel 4-1/2 / 5 Inch Braking Grinder with One-Key Paddle Switch, No Lock, T27 Guard and Side HandleGenerates 11Ampheres corded power to complete the toughest grinding and cutting applications. The Powerstate Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. Redlink Plus Intelligence ensures unmatched levels of performance, protection, and compatibility. The Rapidstop Brake provides stop times under 2 seconds with an abrasive disc. Includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with One-Key, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The M18 Redlithium High Output XC6.0 Batteries (not included) deliver 50 percent more power while running 50 percent cooler than the M18 XC Batteries.Detailed Description LessBrandMilwaukeeMfr. Part#2882-20Customer Part#Campbell Part# MIL2882-20
- M18 Fuel Cordless Drill 1/2 Inch Driver (Tool Only)Built with a 4-Pole frameless motor, the M18 Compact 1/2 Inch Drill Driver delivers 500 in-lbs of torque and up to 1,800 RPM. At only 7-1/4 Inch length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2 Inch metal chuck provide maximum durability, even on the most challenging worksites. Redlink Intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life.Detailed Description LessBrandMilwaukeeMfr. Part#2606-20Customer Part#Campbell Part# MIL2606-20
- 18 Volt Gear Drive Cable Cutter with Bag. (Tool Only) 2-1/8 Inch Jaw Opening 1500 MCM Alumium and 1000 MCM Copper.Set up to accept Milwaukee M18 BatteriesDetailed Description LessBrandHuskieMfr. Part#REC-RL754ACMXCustomer Part#Campbell Part# REC-RL754ACMX
- M12 Four Bay Sequential ChargerLess Swapping, More Charging. Reduces the amount of time spent changing out batteries, increasing productivity on the jobsite. Its slim design makes it the perfect solution for a bench top, as well as storage and transportation of packs on and off the jobsite.Featuring Redlink Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack.The charger offers a compact design, integrated hang holes for vertical mounting, and a skip button to select a desired battery.Detailed Description LessBrandMilwaukeeMfr. Part#48-59-1204Customer Part#Campbell Part# MIL48-59-1204
- 15 Ton Pistol Crimper Flip Top Style. Wire Size 8 AWG - 1500 kcmil Copper, 8 AWG - 1250 kcmil Aluminum. Includes: 120V Charger, Two 4.0 Ah Batteries.Intelli-Crimp Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications. Automatic Retraction Stop (ARS) retracts the ram just enough to get ready for the next cycle, saving time and energy. Accepts P-style die to crimp splices and lugs up to 1500 kcmil copper and 1250 kcmil aluminum. Accepts Kearney PH4/P14 dies without adapter. Crimping head rotates 350 degrees. Includes UA15T U Die Adapter.Detailed Description LessBrandGreenleeMfr. Part#EK1550FLX11Customer Part#Campbell Part# GREEK1550FLX11
- 18 Volt Pistol ACSR Cutter 55 Millimeter Head Includes: 120V Charger, Two 4.0 Ah Batteries.Designed specifically to cut ACSR, guy strand and ground rods. Retraction Stop allows the operator to stop the ram retraction at any point simply by tapping the trigger, and then starting the next cutting cycle from that point saving time and energy. Two-stage hydraulic system provides fast advance and power speeds. One trigger controls all tool functions. Cutting head rotates 350 degree. Tools automatically retract when the cutting cycle is completeDetailed Description LessBrandGreenleeMfr. Part#ESG55LX11Customer Part#Campbell Part# GREESG55LX11
- M18 High Torque Impact Protective Tool Boot. For use with the 2767-20 & 2863-20 Only.This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.Detailed Description LessBrandMilwaukeeMfr. Part#49-16-2767Customer Part#Campbell Part# MIL49-16-2767
- M18 Fuel Barrel Grip Jig Saw (Tool Only) Includes Anti-Splinter Guard, Dust Collection Tube, Dust Cover, Jigsaw Blade, Hex Wrench, & Shoe Guard.The M18 Fuel Barrel Grip Jig Saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The Powerstate Brushless Motor and Redlink Plus Intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18 Redlithium XC5.0 battery the M18 FUEL D-Handle Jig Saw provides up to 105 linear feet of cutting in inch laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with detents at 0; 15; 30; and 45 degrees as well as an LED light and on/off blower to keep the cut line visible while cutting.Detailed Description LessBrandMilwaukeeMfr. Part#2737B-20Customer Part#Campbell Part# MIL2737B-20
- Force Logic Nylon Overhead Cutter & Crimper Utility Bag. Features: Touch, Water Resistant Material, Durable Zipper Closure & Shoulder Strap or Dual Handle Straps for Easy CarryingCarry or store your most frequently used tools with the Milwaukee overhead utility bag. Designed for long-lasting durability. This Milwaukee contractor bag is water-resistant to keep your tools dry and safe from water exposure, making it well-suited for outdoor jobsites. It offers two carrying options including a shoulder strap and two handle straps for convenience and versatility. The Milwaukee overhead utility bag has ample space for the tools and accessories you use most. It measures 9 inch in height, 11 inch width and 17 inch in length. The durable dual zipper design ensures that tools stay put. This red and black Milwaukee contractor bag is a handy way to have easy access to your most frequently used tools and accessories while on the job site or at home. Designed for storing and transporting Milwaukee Forcelogic 12 ton crimpers and cutters. Replacement bag for Milwaukee 2777-22, 2778-22 and 2779-22.Detailed Description LessBrandMilwaukeeMfr. Part#48-22-8279Customer Part#Campbell Part# MIL48-22-8279
- Force Logic Nylon Underground Cable Cutter Bag. Features: Touch, Water Resistant Material, Durable Zipper Closure & Shoulder Strap or Dual Handle Straps for Easy CarryingCarry or store your most frequently used tools with the Milwaukee underground cutter bag. Designed for long-lasting durability. This Milwaukee contractor bag is water-resistant to keep your tools dry and safe from water exposure, making it well-suited for outdoor jobsites. It offers two carrying options including a shoulder strap and two handle straps for convenience and versatility. The Milwaukee underground cutter bag has ample space for the tools and accessories you use most. It measures 9 inch in height, 12 inch width and 23 inch in length. The durable dual zipper design ensures that tools stay put. This Milwaukee contractor bag is a handy way to have easy access to your most frequently used tools and accessories while on the job site or at home. Designed for storing and transporting Milwaukee Forcelogic underground cable cutters. Replacement bag for Milwaukee 2776-22 and 2776R-22.Detailed Description LessBrandMilwaukeeMfr. Part#48-22-8280Customer Part#Campbell Part# MIL48-22-8280
- M18 Fuel 4-1/2 / 5 Inch Braking Grinder with One-Key Slide Switch, Lock-OnThe next advancement in power and performance of cordless grinders while enhancing safety with its Rapidstop Brake. Generates 11 Amphers corded power to complete the toughest grinding and cutting applications. The Powerstate Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. Redlink Plus Intelligence ensures unmatched levels of performance, protection, and compatibility. The Rapidstop Brake provides stop times under 2 seconds with an abrasive disc. Includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with One-key, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The not included M18 XC6.0 Batteries deliver 50 percent more power while running 50 percent cooler. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market.Detailed Description LessBrandMilwaukeeMfr. Part#2883-20Customer Part#Campbell Part# MIL2883-20
- 15 Ton Die-Adaptor Kit - Greenlee "U" Style Dies, Burndy "U" Style Dies, Ilsco ILD Style Dies, T&B 15500 Style Dies, Blackburn 15500 Style Dies.BrandGreenleeMfr. Part#UA15TCustomer Part#Campbell Part# GREUA15T
- M12 Compact Inflater Kit - Includes: M12 Redlithium XC 4.0 Extended Capacity Battery Pack and M12 Battery ChargerDelivers fast, accurate, easy inflation with the portability to take anywhere. With the capability to complete demanding applications like car, LT truck, and compact equipment tires, the M12 Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, The high efficiency motor and pump top-off car tires in under 1 minute. The TrueFill Auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 26 inch hose with an all brass Schrader chuck.Detailed Description LessBrandMilwaukeeMfr. Part#2475-21XCCustomer Part#Campbell Part# MIL2475-21XC
- M18 Compact Band Saw Reamer AttachmentReams 1/2, 3/4, and 1 Inch EMT. Compatible with the M18 FUEL Compact Band Saw (2829-20) and M18 FUEL Compact Dual-Trigger Band Saw (2829S-20). Tool-Free Installation and Removal. Attaches directly to the back pulley on the battery side of the toolDetailed Description LessBrandMilwaukeeMfr. Part#49-90-2029Customer Part#Campbell Part# MIL49-90-2029
