How can we get better? Print

Cordless Plumbing Tools

28 Results Found
per page
  1. M12 Plastic Pipe Shear (Tool Only)
    Plastic Pipe Shear can slice through 2 inch schedule 80 PVC in just 3 seconds. The cordless plastic pipe shear is compatible with M12 lithium-ion batteries (not included), providing you with more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact, water and rust resistant. The ultra- sharp plastic pipe shear with pierce point makes burr-free cuts, helping you cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade providing you with maximum efficiency on repetitive cuts. The plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time, giving you the versatility and productivity you need.
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2470-20
    Campbell Part# MIL2470-20
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $264.64 ea
    Est. Lead Time: 21 Bus. Days
  2. Reed CPAPDEW - Pump Stick Battery Adapter Plate for Use of 18-20V DeWalt Slide Style Battery
    Provides compatibility for extra battery options for REED Pump Stick. Adapter plates fit 18V-20V lithium ion, current slide style DeWalt batteries. For strength, battery adapters plates are constructed of Delrin or glass-filled polycarbonate. Swap the plate to fit common batteries be sure to match the plate to operators battery brand.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CPAPDEW
    Campbell Part# RMC98140
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $29.45 ea
    Est. Lead Time: 18 Bus. Days
  3. Reed CPAPMIL - Pump Stick Battery Adapter Plate for Use of 18V Milwaukee Slide Style Battery
    Provides compatibility for extra battery options for REED Pump Stick. Adapter plates fit 18V lithium ion, current slide style Milwauee batteries. For strength, battery adapters plates are constructed of Delrin or glass-filled polycarbonate. Swap the plate to fit common batteries be sure to match the plate to operators battery brand.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CPAPMIL
    Campbell Part# RMC98141
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $29.45 ea
    Est. Lead Time: 24 Bus. Days
  4. Reed CP15FINESCRN - Pump Stick Fine Filter Screen - 3 Pack. Filters out anything larger than than .021 from entering the pump.
    Screen removes small particles before water enters the Pump Stick. Filters out anything larger than than .021 from entering the pump. This is about the size of sugar granules. Operator must check screen during use to keep it clear for best pump action. Install screen inside end cap to keep
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CP15FINESCRN
    Campbell Part# 98167
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $6.11 ea
    Est. Lead Time: 12 Bus. Days

    Discontinued Item

    You may not order a quantity greater than is currently available. There are currently 2 available. However availability is subject to change.

  5. M18 Fuel Cordless Pipe Threader Kit W/ ONE KEY Monitoring - Includes Tool, (2) 12.0 Ah High Output Batteries, M18/12 Dual Voltage Charger, Threading Support Arm and Carrying Case
    The industry first cordless pipe threader, revolutionizing the pipe threading process. The cordless pipe threader features AutoStop technology that senses severe kickback and automatically shuts the tool off. It also has a die head retention lock preventing die head ejection and a side grip to eliminate the need for you to hold the spinning die head when starting threads. The portable pipe threader delivers unmatched tool control and functionality and allows you to thread faster than the corded competition. Featuring a multi-speed selector, this powerful pipe threader threads faster than corded competitors, maximizing your productivity without compromising thread quality. Threads up to 2 Inch Black iron pipe, stainless steel, and rigid metal conduit (RMC).
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2874-22HD
    Campbell Part# MIL2874-22HD
    Video
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $2,309.03 ea
    Est. Lead Time: 21 Bus. Days
  6. Reed CP24HDLGRIP - Pump Stick 2 Foot Extended Handle with Grip. Add extra reach for the operator by using this extended handle. Comfort grip on handle allows secure grip by operator.
    Brand
    Reed
    Mfr. Part#
    CP24HDLGRIP
    Campbell Part# RMC98184
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $33.76 ea
    Est. Lead Time: 12 Bus. Days
  7. Reed CP15FILTER- Pump Stick Felt Filter 100 Micron - 2 Pack - Filters out anything larger than 100 microns (approximately .004) from entering the pump.
    Filter removes small particulates before water enters the Pump Stick. Filters out anything larger than 100 microns (approximately .004) from entering the pump. This is about the size of flour. Felt filter must be used with screens #98166 or #98167 to keep felt in position. Install screens or filters inside end cap to keep secure during use. Operator must check filter during use to keep it clear for best pump action.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CP15FILTER
    Campbell Part# RMC98168
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $16.19 ea
    Est. Lead Time: 12 Bus. Days
  8. M18 FUEL DRAIN SNAKE W/ CABLE DRIVE KIT INCLUDES: (1) MULTI-VOLTAGE CHARGER, (1) M18 REDLITHIUM 2.0 COMPACT BATTERY, (1) 5/16" X 36" INNER CORE BULB HEAD CABLE (48-53-2673)
    M18 FUEL Drain snake with cable-drive locking feed system represents the next level in performance for handheld machines, and is the first to bring brushless motor technology to the drain cleaning industry. The POWERSTATE brushless motor provides more clearing power than corded competitors for tough jobs through 3 in. drain lines. REDLINK Plus intelligence ensures maximum performance under load and improves control throughout the entire process. The REDLITHIUM battery pack powers through multiple jobs on a single charge, delivering cordless mobility, safety, and power supply to the drain cleaning industry. Features Cable-drive locking feed system maintains selected feed speed, and auto-adjusts to compatible cable sizes for the best cable grip when feeding and working the clog. Fully enclosed drum best protection and mess containment. LED light illuminates work area underneath sinks and other dark spaces. Capacity 50 Ft. x 1/4 in. and 5/16 in. 35 Ft. x 3/8 in. inner core cables
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2772A-21
    Campbell Part# MIL2772A-21
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $506.24 ea
    Est. Lead Time: 21 Bus. Days
  9. M18 Cordless Short Throw Press Tool Kit with 3 PEX Crimp Jaws, Includes: Tool, (2) 2.0AH Compact Batteries 48-11-1820, 48-59-1812 M12/M18 Multi-Volt Charger, 1/2, 3/4 and 1 INCH PEX Crimp Jaws and Carrying Case
    The M18 Short Throw Press Tool is the fastest press tool on the market, pressing 40% faster than the competition providing users the fastest, effortless installs from branch to fixture. Designed for one handed use, the M18 Short Throw Press tool is an easy to use solution compared to hand tools. Spring loaded jaws grip the ring for precise alignment to the fitting, while Auto Cycle ensures a full press every time; delivering added assurance of quality connections.
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2674-22C
    Campbell Part# MIL2674-22C
    Video
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $923.10 ea
    Est. Lead Time: 21 Bus. Days
  10. M18 Fuel Cordless Pipe Threader -ONE KEY Monitoring System - BARE TOOL ONLY - Includes Threading Support Arm and Carrying Case
    The industry first cordless pipe threader, revolutionizing the pipe threading process. The cordless pipe threader features AutoStop technology that senses severe kickback and automatically shuts the tool off. It also has a die head retention lock preventing die head ejection and a side grip to eliminate the need for you to hold the spinning die head when starting threads. The portable pipe threader delivers unmatched tool control and functionality and allows you to thread faster than the corded competition. Featuring a multi-speed selector, this powerful pipe threader threads faster than corded competitors, maximizing your productivity without compromising thread quality. Threads up to 2 Inch black iron pipe, stainless steel, and rigid metal conduit (RMC).
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2874-20
    Campbell Part# MIL2874-20
    Video

    Discontinued Item

    You may not order a quantity greater than is currently available. There are currently 0 available. However availability is subject to change.

  11. Reed CPHOSE4FT Hose 4-foot (1.2 m) Long with Magnetic Connection - Abrasion and Cut Resistant for Use with Pump Stick.
    Abrasion-resistant, industrial grade hose. Smooth interior ensures efficient water flow. Crush resistant for reliable water removal. Plastic, lightweight hose resists corrosion and remains flexible at low temperatures. Hose design includes magnetic hose connecter. Hose Coupling #98147 required to connect hoses for additional length.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CPHOSE4FT
    Campbell Part# RMC98144
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $56.10 ea
    Est. Lead Time: 12 Bus. Days
  12. Reed Model CPHOSE7FT Hose 7-foot (1.2 m) Long with Magnetic Connection - Abrasion and Cut Resistant for Use with Pump Stick.
    Abrasion-resistant, industrial grade hose. Smooth interior ensures efficient water flow. Crush resistant for reliable water removal. Plastic, lightweight hose resists corrosion and remains flexible at low temperatures. Hose design includes magnetic hose connecter. Hose Coupling #98147 required to connect hoses for additional length.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CPHOSE7FT
    Campbell Part# RMC98145
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $74.80 ea
    Est. Lead Time: 12 Bus. Days
  13. Reed CP15COUP Hose Coupling with Magnetic Connection. Securely Connects Two Pump Stick Hoses. Magnet Design Holds Hoses Together.
    Brand
    Reed
    Mfr. Part#
    CP15COUP
    Campbell Part# RMC98147
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $26.31 ea
    Est. Lead Time: 18 Bus. Days
  14. Reed CP15CASE - Pump Stick Case - Regular Size - Heavy-duty Case with Protective Foam Insert. Fits Pump, Hose, Battery, Charger and Accessories.
    Brand
    Reed
    Mfr. Part#
    CP15CASE
    Campbell Part# RMC98193
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $67.32 ea
    Est. Lead Time: 12 Bus. Days
  15. Reed CP15LCASE - Pump Stick Case - Oversized, Heavy-Duty Case with Protective Foam Insert. Fits Pump, Multiple Hoses, Battery, Charger and Accessories.
    Brand
    Reed
    Mfr. Part#
    CP15LCASE
    Campbell Part# RMC98194
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $104.05 ea
    Est. Lead Time: 12 Bus. Days
  16. Reed Model CP15MEDSCRN - Pump Stick Medium Filter Screen - 3 Pack. Filters out anything larger than than .034 from entering the pump.
    Screen removes small particles before water enters the Pump Stick. Filters out anything larger than than .034 from entering the pump. This is about the size of coffee grounds. Operator must check screen during use to keep it clear for best pump action. Install screen inside end cap to keep
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CP15MEDSCRN
    Campbell Part# RMC98166
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $16.19 ea
    Est. Lead Time: 12 Bus. Days
  17. Reed CP15SCRFLTR Pump Stick Screen/Filter Assortment - Contains One of Each of Fine Screen, Medium Screen and Felt Filter.
    Keep this screens and filter assortment on hand to adapt to different water removal situations. Screens are required to protect particles from entering the impeller. Install screens or filters inside end cap to keep secure during use. Operator must check screens and filter during use to keep it
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CP15SCRFLTR
    Campbell Part# RMC98190
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $16.19 ea
    Est. Lead Time: 12 Bus. Days
  18. Reed CPMSTR Marine Strainer - Stainless Steel 1 Per Pack. Filters out anything larger than bigger than .250 from entering pump. This is about the size of pea gravel.
    Removes debris before water enters the Pump Stick. Filters out anything larger than bigger than .250 from entering the pump. This is about the size of pea gravel. This strainer is recommended only for clean water transfer such as pools and spas. Install screen inside end cap to keep secure during use. Operator must check screen during use to keep it clear for best pump action.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CPMSTR
    Campbell Part# RMC98188
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $27.84 ea
    Est. Lead Time: 12 Bus. Days
  19. Reed CP15-38B Pump Stick 18 Volt Cordless Power Water Pump w/ 2 Ft. Hose- Base Unit with Battery Adapter Plate for Bosch -Adapters for Milwaukee and DeWalt Available-Pumps 15 Gallons Per Minute - Battery and Charger NOT included.
    Battery operated pump transfers water at 15 gallons per minute. Compatible with different battery brands by changing the battery adapter plate. Adapter plates fit 18V-20V lithium ion, slide style batteries for some popular brands. Rugged, contractor grade, impact-resistant glass filled polycarbonate parts and aluminum body for durability and strength. Water-resistant, sealed power switch for safety. Secure, magnetic hose connection provides fast, reliable link. Quick change motor to lessen downtime. Multiple screen/filter options to suit the job. Ships with 6 inch, comfort grip handle.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    CP15-38B
    Campbell Part# RMC08140
    Video
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $263.04 ea
    Est. Lead Time: 18 Bus. Days
  20. Reed CP15-38B Pump Stick 18 Volt Cordless Power Water Pump Kit w/ 2 Ft. Hose- Base Unit with Battery Adapter Plate for Bosch and 98140 Adapter for DeWalt 18-20 Volt Batteries-Pumps 15 Gallons Per Minute - Battery and Charger NOT included.
    Battery operated pump transfers water at 15 gallons per minute. Compatible with different battery brands by changing the battery adapter plate. Adapter plates fit 18V-20V lithium ion, slide style batteries for some popular brands. Rugged, contractor grade, impact-resistant glass filled polycarbonate parts and aluminum body for durability and strength. Water-resistant, sealed power switch for safety. Secure, magnetic hose connection provides fast, reliable link. Quick change motor to lessen downtime. Multiple screen/filter options to suit the job. Ships with 6 inch, comfort grip handle.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    08140-DEWALT
    Campbell Part# 08140-DEWALT
    Video
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $292.49 ea
    Est. Lead Time: 12 Bus. Days
  21. Reed CP15-38B Pump Stick 18 Volt Cordless Power Water Pump Kit w/ 2 Ft. Hose- Base Unit with Battery Adapter Plate for Bosch and 98141 Adapter for Milwaukee M18 Volt Battery-Pumps 15 Gallons Per Minute - Battery and Charger NOT included.
    Battery operated pump transfers water at 15 gallons per minute. Compatible with different battery brands by changing the battery adapter plate. Adapter plates fit 18V-20V lithium ion, slide style batteries for some popular brands. Rugged, contractor grade, impact-resistant glass filled polycarbonate parts and aluminum body for durability and strength. Water-resistant, sealed power switch for safety. Secure, magnetic hose connection provides fast, reliable link. Quick change motor to lessen downtime. Multiple screen/filter options to suit the job. Ships with 6 inch, comfort grip handle.
    Detailed Description Less
    Brand
    Reed
    Mfr. Part#
    08140-MILWAUKEE
    Campbell Part# 08140-MILWAUKEE
    Video
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $292.49 ea
    Est. Lead Time: 12 Bus. Days
  22. 1/4 Inch x 50 Foot Inner Core Bulb Head Drain Cable w/ RUST GUARD Plating
    The new standard in the market for rust protection, maneuverability, and durability delivering up to 3X longer life. Traditional cables will oxidize, causing fragments of steel to erode off the cable, damaging the structural integrity. Through a proprietary plating process, RUST GUARD plating delivers 20X more rust resistance, protecting against metal fatigue.
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    48-53-2672
    Campbell Part# MIL48-53-2672
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $109.93 ea
    Est. Lead Time: 21 Bus. Days
  23. M12 Cordless Plastic Pipe Shear Kit. Includes M12 Lithium-ion Battery, Charger, & Carrying Case.
    Plastic Pipe Shear can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12 lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12 plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12 REDLITHIUM CP1.5 battery pack, an M12 Lithium-Ion battery charger, and a carrying case.
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2470-21
    Campbell Part# MIL2470-21
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $312.32 ea
    Est. Lead Time: 21 Bus. Days
  24. M12 12-Volt Lithium-Ion Cordless 9 GPM 0 hp. Submersible Stick Water Transfer Pump (Tool Only)
    Delivers superior filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more. Featuring a 36 in. submersible aluminum barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and difficult to reach areas. Equipped with HYDRO PASS filter technology, its 360° filter maximizes flow in heavy debris, minimizing downtime caused by clogging. Powered by the M12 battery platform, this water transfer pump eliminates repetitive manual pumping and improves control, requiring only one hand to pump, freeing the other to control the outflow. With a 15 ft. maximum head height and an outlet compatible with a standard 3/4 in. garden hose, this pump delivers the power to push water farther out of pits and basins, over walls, and to the ideal deposit location. Outlet connection: 3/4 in. brass, attaches to standard garden hose. Up to 9 GPM. Up to 275 Gal. on 4.0 battery. Hydro pass filter: 360° filter maximizes flow in heavy debris. 36 in. submersible barrel for easier inlet control and reach. Threaded filter designed for easy removal. Lightweight and cordless for easy setup and carrying to and from jobs. Designed primarily to pump water, with heavy debris in outdoor applications. Fully compatible with the M12 System, featuring over 100+ tools. Includes: (1) M12 12-Volt lithium-ion cordless 9 GPM stick water transfer pump (tool only). Battery and charger sold separately.
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2579-20
    Campbell Part# MIL2579-20
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $216.24 ea
    Est. Lead Time: 20 Bus. Days
  25. Portable Pipe Threading Die Head Kit - Includes 1/2, 3/4, 1, 1-1/4, 1-1/2 & 2 Inch High-Speed NPT Forged Aluminum Die Heads
    Portable Pipe Threading Forged Aluminum Die Heads are the Industry's lightest die heads. Forged from military grade Aluminum providing maximum durability and up to 50 percent lower weight from competitive die heads. Up to 25 percent larger slots allow clearer visibility with less nesting for a smoother threading process. The smooth face caps gives a comfortable place to put your hand while engaging onto the pipe. Compatible with Milwaukee M18 FUEL 2" Pipe Threader, Ridgid 700 Power Drive, and DeWalt DCE700 Threader.
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    48-36-1060
    Campbell Part# MIL48-36-1060
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $1,269.74 ea
    Est. Lead Time: 999 Bus. Days CURRENTLY UNAVAILABLE
  26. M18 Fuel Cordless Compact Pipe Threader Kit -ONE KEY Monitoring System - Includes 1/2 to 1-1/4" Die Heads, 2x Batteries, Charger, Threading Support Arm & Carrying Case
    Lightweight, Side Grip, Autostop, Locking Die Head Interfac & Threads up to 1-1/4” black iron pipe, stainless steel, rigid metal conduit (RMC)
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    2870-22
    Campbell Part# MIL2870-22
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $2,707.76 ea
    Est. Lead Time: 20 Bus. Days
  27. 1/2"-2" HIGH SPEED NPT Portable Pipe Threading Forged Aluminum Die Head Kit
    Milwaukee Portable Pipe Threading Forged Aluminum Die Heads are the Industry's lightest die heads. Forged from military grade Aluminum providing maximum durability and up to 50% lower weight from competitive die heads.
    Detailed Description Less
    Brand
    Milwaukee
    Mfr. Part#
    48-36-1061
    Campbell Part# MIL48-36-1061
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $1,269.74 ea
    Est. Lead Time: 12 Bus. Days
  28. M18 Transfer Pump Replacement Impeller and Seal Kit
    Brand
    Milwaukee
    Mfr. Part#
    49-16-2771
    Campbell Part# MIL49-16-2771
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $31.62 ea
    Est. Lead Time: 12 Bus. Days
28 Results Found
per page
Search engine powered by ElasticSuite