Linear Track Section

Type,surface;voltage,12/24 Volt;current Rating,24 Amp;width,15/16";height,height;material,extruded Aluminum (i Beam Channel);approval,ul, Csa

Size,1 3/8" W X 1 3/8" Hmaterial,extruded Aluminum;used On,miniature Low Voltage Track Lighting

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (channel), Thermoplastic (insulator);approval,ul/cul

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Length,6';no Of Circuits,1;type,surface/pendant;voltage,120 Volt;current Rating,current Rating;width,1 3/8";height,1/2";material,extruded Aluminum (channel), Thermoplastic (insulator);approval,ul/ucl

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (channel), Thermoplastic (insulator);approval,ul/cul

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (i Beam Channel), Thermoplastic (insulator);approval,ul, Csa

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (i Beam Channel), Thermoplastic (insulator);approval,ul, Csa

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (i Beam Channel), Thermoplastic (insulator);approval,ul, Csa

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (i Beam Channel), Thermoplastic (insulator);approval,ul, Csa

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (i Beam Channel), Thermoplastic (insulator);approval,ul, Csa

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (i Beam Channel), Thermoplastic (insulator);approval,ul, Csa

Type,surface/pendant;voltage,120 Volt;current Rating,20 Amp;width,1 3/8";height,height;material,extruded Aluminum (i Beam Channel), Thermoplastic (insulator);approval,ul, Csa

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Type,surface;voltage,12/24 Volt;current Rating,20 Amp;width,3/4";height,height;material,extruded Abs Plastic/polycarbonate (channel);approval,ul, Csa

Juno Trac-lites Track Sections Are The Backbone Of The Versatile, Economical Juno Trac-lites System. Each Track Section Features A Rigid Aluminum Channel With A Low, 1/2 In. Profile That Fits Snugly Against The Ceiling. The Track Is Compatible With The Full Range Of Juno Trac-lites Fixtures And Accessories.

Juno Trac-lites Track Sections Are The Backbone Of The Versatile, Economical Juno Trac-lites System. Each Track Section Features A Rigid Aluminum Channel With A Low, 1/2 In. Profile That Fits Snugly Against The Ceiling. The Track Is Compatible With The Full Range Of Juno Trac-lites Fixtures And Accessories.

Juno Trac-lites Track Sections Are The Backbone Of The Versatile, Economical Juno Trac-lites System. Each Track Section Features A Rigid Aluminum Channel With A Low, 1/2 In. Profile That Fits Snugly Against The Ceiling. The Track Is Compatible With The Full Range Of Juno Trac-lites Fixtures And Accessories.

Pendant/surface; Extruded Aluminum; White; 120 V; 20 Ampere; 1 Circuit(s); 2 Ft Nominal Length; Length 19-7/8 Inch; Width 1-3/8 Inch; Height 1/2 Inch; Approval Ul, Cul; Juno[r Brand; R2 Model; Conductor Material 12 Gauge Solid Copper

Low-profile, Single-circuit Trac Sections For Surface Or Pendant Mounting. I-beam Cross Section Provides Added Strength And Rigidity In Pendant Suspended Applications. Compatible With A Full Range Of Feed, Connector And Mounting Accessories, As Listed On Back Of This Page, To Complete Virtually Any Installation Requirement. Accepts All Trac-master And Trac-lites Trac Fixtures.

Low-profile, Single-circuit Trac Sections For Surface Or Pendant Mounting. I-beam Cross Section Provides Added Strength And Rigidity In Pendant Suspended Applications. Compatible With A Full Range Of Feed, Connector And Mounting Accessories, As Listed On Back Of This Page, To Complete Virtually Any Installation Requirement. Accepts All Trac-master And Trac-lites Trac Fixtures.

Low-profile, Single-circuit Trac Sections For Surface Or Pendant Mounting. I-beam Cross Section Provides Added Strength And Rigidity In Pendant Suspended Applications. Compatible With A Full Range Of Feed, Connector And Mounting Accessories, As Listed On Back Of This Page, To Complete Virtually Any Installation Requirement. Accepts All Trac-master And Trac-lites Trac Fixtures.

Low-Profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single electrical feed or one 20-amp circuit controlled by two switches. I-beam cross section provides added strength and rigidity in pendant suspended applications. Compatible with a full range of feed, connector and mounting accessories, as listed on back of this page, to complete virtually any installation requirement. Accepts all Trac-Master and Trac-Lites trac fixtures, which have a moveable hot contact to allow operation using circuit (or switch leg) 1 or 2. Extruded aluminum I beam channel. Onepiece thermoplastic insulator Injection molded polycarbonate dead-end with set screw. Standard lengths may be cut-to-length by installer. Three 12 gauge solid copper conductors. Each circuit rated 20 amps at 120 volts (40 amps total). Aluminum channel used as system ground. One-piece insulator insures consistent conductor spacing for reliable electrical contact. Insulating bushings supplied at mounting hole locations to prevent shorts to ground.

Low-Profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single electrical feed or one 20-amp circuit controlled by two switches. I-beam cross section provides added strength and rigidity in pendant suspended applications. Compatible with a full range of feed, connector and mounting accessories, as listed on back of this page, to complete virtually any installation requirement. Accepts all Trac-Master and Trac-Lites trac fixtures, which have a moveable hot contact to allow operation using circuit (or switch leg) 1 or 2. Extruded aluminum I beam channel. Onepiece thermoplastic insulator Injection molded polycarbonate dead-end with set screw. Standard lengths may be cut-to-length by installer. Three 12 gauge solid copper conductors. Each circuit rated 20 amps at 120 volts (40 amps total). Aluminum channel used as system ground. One-piece insulator insures consistent conductor spacing for reliable electrical contact. Insulating bushings supplied at mounting hole locations to prevent shorts to ground.