Test Electrode For 1" Ball Socket Ground Clamp Assembly

This Tester Is Designed To Test In-service Grounding And Jumpering Cable Assemblies; Regular Periodic Use Will Ensure That Jumper Assemblies Perform As Designed For Personnel Safety; Tester Is Completely Self Contained, Portable And Sets Up In Seconds. Any Standard 120 Volt Grounded Outlet Will Provide Power To The Tester. A Reference Chart Is Provided For #2, 1/0, 2/0, And 4/0 Str. Cu. Cables Of Specific Lengths To Determine Correct Test Values; A Built In Digital Meter Allows The Operator To Easily Input The Correct Voltage Specified On The Reference Chart For Various Sizes And Lengths Of Cable; A Built In Digital Ammeter Tells The Operator If The Assembly Is In Good Working Condition; Test Electrodes Are Available To Fit A Variety Of Grounding Equipment Including Elbows, Grounding Bushings, And Ball Socket Clamps; Maximum Voltage Output Is Limited To Protect The Operator; Pressure Sensitive Inspection Labels Are Available To Tag Cables After Testing; Specifications: Test Electrode For 1 Inch Ball Socket Design Ground Clamp Assembly