Safety Grounding Equipment

Grounding Ball Stud; Type Ball Stud; Weight 0.784 Lb; Length 7 Inch; Continuous Current 400 Ampere; Recommended Torque Standard; Used On Item Truck Grounding System

Grounding Ball Stud; Type Ball Stud; Weight 0.549 Lb; Length 4.5 Inch; Shank Size 5/8 Inch; Continuous Current 400 Ampere; Recommended Torque 300 Lb; Material Type Standard; Used On Item Truck Grounding System

This Tester Is Designed To Test In-service Grounding And Jumpering Cable Assemblies; Regular Periodic Use Will Ensure That Jumper Assemblies Perform As Designed For Personnel Safety; Tester Is Completely Self Contained, Portable And Sets Up In Seconds. Any Standard 120 Volt Grounded Outlet Will Provide Power To The Tester. A Reference Chart Is Provided For #2, 1/0, 2/0, And 4/0 Str. Cu. Cables Of Specific Lengths To Determine Correct Test Values; A Built In Digital Meter Allows The Operator To Easily Input The Correct Voltage Specified On The Reference Chart For Various Sizes And Lengths Of Cable; A Built In Digital Ammeter Tells The Operator If The Assembly Is In Good Working Condition; Test Electrodes Are Available To Fit A Variety Of Grounding Equipment Including Elbows, Grounding Bushings, And Ball Socket Clamps; Maximum Voltage Output Is Limited To Protect The Operator; Pressure Sensitive Inspection Labels Are Available To Tag Cables After Testing; Specifications: Test Electrode For 1 Inch Ball Socket Design Ground Clamp Assembly

Ground Clamps For Substation Grounding - Bronze; The Grounding Clamps With Hanger Studs Enable Substation Maintenance Crews To Utilize Their Portable Grounds On Large Bus By Providing A Fault Current Rated Hanger Stud As Part Of The Clamp (clamp Numbers 21056, 21546-1, 12282); Use Of The Hanger Stud Clamps Could Save Cost Of Special Ground Assemblies Made Up For Each Substation; Specifications: Main Line Range : Maximum 3-5/8?0020005800202-1/4?002000520065ctangular Bus; Minimum Stud Is 4?0020004c006fng; Max. Size Cable : Max Fault Current Rating : 43ka@ 15 Cycles; Terminal Type : Bolted; Weight : 4.4 Lbs

Distribution / Sub Transmission Grounding Set; Factory Assembled And Can Be Used On A Three Phase Wye Or Delta System; The Grounding Set Provides Jumper Lengths Adequate For Crossarm Construction And Armless (narrow Profile) Construction; The Grounding Set Includes A Grounding Cluster Bar Which Enables The User To Provide ?0073ingle Point?002000470072ounding; Conductor Range - Ground Set Can Be Used On No. 6 Solid (.16 O.d.) Through 1,033 Mcm Acsr (1.5?0020004f002ed.); Grounding Jumpers - Jumpers Are Assembled With Bright Yellow Neoprene Jacketed Copper Grounding Cable. This Ground Cable Is Very Flexible In Cold Weather. Fault Current Rating - Grounding Sets Can Be Ordered With Proper Cable Size To Match Customers Fault Current Needs; Specifications: Grounding Set With 2/0 Cable; Fault Current Rating: 27,000 Amps - 15 Cycles; Weight : 62 Lbs

Jacked Ground Set; Type Pre Assembled Set; Weight 11.76 Lb; Configuration Single Phase; Optional Kit Ground Rod; Material Type Non Standard