Inductive Sensor XS8 40x40x117 - PBT - Sn40 mm - 24..240VAC/DC - Terminals
This XS turret head (40 x 40 x 117 mm) with an inductive proximity sensor has a PBT case. It has a supply voltage of 24V to 240V AC/DC. This general purpose flat inductive proximity sensor has an increased range. It is mountable directly on a surface, thanks to 4 screws fixing points. It provides mechanical resistance and chemical withstand thanks to PBT case. It has a yellow LED for output status indication for easier sensor setup and troubleshooting. It can operate in very cold (-25C) and hot environments (+70C). Its increased sensing range makes it ideal for process where precise circulation of objects is not possible.
Brand
Square D by Schneider
Mfr. Part#
XS8C4A4MPP20
Customer Part#
Campbell Part#
TESXS8C4A4MPP20
| Body Type | Fixed |
|---|---|
| Detector Flush Mounting Acceptance | NOn Flush Mountable |
| Device Application | - |
| Discrete Output Function | 1 NO Or 1 NC Programmable |
| Electrical Connection | Screw-clamp Terminals, Clamping Capacity |
| Enclosure Material | PBT |
| Ip Degree Of Protection | Ip65 Conforming To Iec 60529,ip67 Conforming To Iec 60529,ip69k Conforming To Din 40050 |
| Material | Plastic |
| Output Circuit Type | AC/DC |
| Range of Product | Osisense XS |
| Sensor Design | Form 40 X 40 X 117 |
| Sensor Name | XS8 |
| Sensor Type | Inductive Proximity Sensor |
| Series Name | General Purpose |
| Size | 117 Mm |
| [SN] Nominal Sensing Distance | 1.57 In (40 MM) |
| Switching Capacity In mA | 5...200 mA DC,5...300 mA AC |
| Type Of Output Signal | Discrete |
| [us] Rated Supply Voltage | 24...240 V DC,24...240 V AC 50/60 Hz |
| Wiring Technique | 2-Wire |