Inductive Sensor XS5 M8 - L62mm - Stainless - Sn1.5mm - 12..48VDC - M12
This XS cylindrical (M8 thread) inductive proximity sensor has a PPS sensing face and a stainless steel grade 303 case. It has a supply voltage of 12V to 48V DC. This general purpose threaded cylindrical inductive proximity sensor is flush mountable. It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. Non-magnetic 303 stainless steel provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance. It has 4 LED viewports for easy sensor status viewing, setup and troubleshooting. IP65 and IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-25C) and hot environments (+70C). It has a standard M12 connector, compatible with all existing market sensor cabling.
Brand
Square D by Schneider
Mfr. Part#
XS508BLPAM12
Customer Part#
Campbell Part#
TESXS508BLPAM12
| Body Type | Fixed |
|---|---|
| Detector Flush Mounting Acceptance | Flush Mountable |
| Device Application | - |
| Discrete Output Function | 1 NO |
| Discrete Output Type | PNP |
| Electrical Connection | Male Connector M12 4 Pins |
| Ip Degree Of Protection | IP67 conforming to IEC 60529 |
| Material | Stainless Steel |
| Output Circuit Type | DC |
| Range of Product | Osisense XS |
| Sensor Design | Cylindrical M8 |
| Sensor Name | XS5 |
| Sensor Type | Inductive Proximity Sensor |
| Series Name | General Purpose |
| Size | 62 Mm |
| [SN] Nominal Sensing Distance | 0.06 In (1.5 MM) |
| Switching Capacity In mA | <= 200 mA DC With Overload And Short-circuit Protection |
| Type Of Output Signal | Discrete |
| [us] Rated Supply Voltage | 12...48 V DC With Reverse Polarity Protection |
| Wiring Technique | 3-Wire |