Inductive Sensor XS1 M8 - L33mm - Brass - Sn2mm - 12..24VDC - Cable 2m
This XS cylindrical (M8 thread) inductive proximity sensor has a PPS sensing face and a nickel plated brass case. It has a supply voltage of 12V to 24V DC. This general purpose threaded cylindrical inductive proximity sensor is flush mountable and has an increased sensing range. It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. High corrosion and impact-resistant nickel plating, keeping aspect and performance of the sensor for a longer time. Nickel plated brass provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance. It has an annular LED for easy sensor status viewing, setup and troubleshooting. IP65 and IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-25C) and hot environments (+70C).
Brand
Square D by Schneider
Mfr. Part#
XS108B3PBL2
Customer Part#
Campbell Part#
TESXS108B3PBL2
| Body Type | Fixed |
|---|---|
| Cable length | 6.56 Ft (2 M) |
| Detector Flush Mounting Acceptance | Flush Mountable |
| Device Application | - |
| Discrete Output Function | 1 NC |
| Discrete Output Type | PNP |
| Electrical Connection | Cable |
| Ip Degree Of Protection | Ip65 Conforming To Iec 60529,ip67 Conforming To Iec 60529 |
| Material | Metal |
| Output Circuit Type | DC |
| Range of Product | Osisense XS |
| Sale Per Indivisible Quantity | 1 |
| Sensor Design | Cylindrical M8 |
| Sensor Name | XS1 |
| Sensor Type | Inductive Proximity Sensor |
| Series Name | General Purpose |
| Size | 33 MM |
| [SN] Nominal Sensing Distance | 0.1 In (2.5 MM) |
| Switching Capacity In mA | <= 200 mA with overload and short-circuit protection |
| Type Of Output Signal | Discrete |
| [us] Rated Supply Voltage | 12...24 V DC With Reverse Polarity Protection |
| Wiring Technique | 3-Wire |