Insulating Line Hoses

Type: Transformer Spade Insulator; Rating: Class 2, Type II; Dimensions: 2.60 x 4.40 x 10.60 in; Material: Salcor; Material Color: Orange; Weight: 1.40 lb

Molded from flexible SALCOR, they have excellent aging and weathering characteristics. The opening at the top end of the slot holds the cover on to the terminal. Wide lips extending along the slot provide additional protection over the connection.

TH111 Meter Terminal Cover is used to avoid accidental contact with energized parts on 100 and 200 Amp single phase meter sockets. Made of orange SALCOR.

Straight Style SALCOR line hose is available in orange Type II SALCOR. SALCOR remains flexible even in cold weather and it is not damaged by ozone or ultraviolet rays. Each line hose has Salisbury RIB-GRIP Locking System. The straight end style is available in three sizes: 1 and 1.25 I.D. rated at 17kV, Class 2 and 1.5 I.D. rated at 26.5kV, Class 3.1.5 I.D. rated at 26.5kV, Class 3. ASTM Class 2; Type II; 1 x 6 ; 5.5lbs.

Conventional Connector End Line Hosesare made from Type II orange SALCOR and can be used on 1, 1.25, or 1.5 I.D. conventional line hose. To connect 2 and 2.5 I.D. conventional line hose, use the SU System Connector. ASTM Class 2; Type II; 1.25 x 4.5; 6.5 lbs.

Hastings 25 KV Line Guards and Insulator Hoods are designed for easy installation and removal. They are made from bright yellow ABS plastic which gives high visibility. Will not warp or distort.

Insulating Line Hose and Conductor Covers: Type - Conductor Cover; Length - 4.00 ft; Material - ABS Plastic; Color - Yellow; Weight - 8.50 lb; Additional Information - 35 KV Line Guard, Rated 21.1KV Phase To Ground and 36.6KV Phase To Phase (Brush Only)

15/25 KV INSULATED HOOD FOR SINGLE PINS; 15/25 KV; Designed for easy installation and removal; Line guards - 46 long; Installation - Guards and hoods are equipped with eye and can be installed with all shotgun hot sticks; Eyes are adjustable to allow guards to be installed at angles; Interlocking male and female ends allow as many guards as needed to be installed on conductors; 15/25 KV - Guards are designed for use on conductor sizes 6 solid through 666.6 26/7 ACSR; Brush contact only; SPECIFICATIONS: RATING COVERED PHASE TO COVERED PHASE - 26.4 KV; RATING COVERED PHASE TO COVERED GROUND - 15.3 KV; WEIGHT : 4 LBS

LINE GUARDS AND INSULATOR HOODS; 35 KV, 46 KV, AND 69 KV; Designed for easy installation and removal; Line guards are 4 6 long; Installation - Guards and hoods are equipped with eye and can be installed with all shotgun sticks; Guards with 4 fiberglass installing stick are also an option; Eyes are adjustable to allow installation of guards at angles; Interlocking male and female ends allow as many guards as needed to be installed on conductors; Wire Range - Guards are designed to accept all sizes up to and including 1,272 MCM 45/7 ACSR; Brush contact only; SPECIFICATIONS : DESCRIPTION : 35 KV INSULATED HOOD - SINGLE PIN - 22 INCHES LONG; VOLTAGE RATING : 35 KV - IF USED WITH 6010 OR 6011 GUARDS; 46 KV - IF USED WITH 6012 OR 6013 GUARDS; 69 KV - IF USED WITH 12000 OR 12001 GUARDS; WEIGHT : 5 LBS

Insulating Insulator Covers: Type - Pin Type Insulator Cover; Insulator Class - ANSI 55-5; Rating - Class 3, Type II; Use With - Line Hose, 1.25-1.50 in; Dimensions - 16.00 in x 8.00 in; Material - Salcor; Material Color - Orange; Installation - Rib-Grip, Clamp Pins Not Included; Weight - 7.00 lb; Manufacturer Series - Conventional System

Conventional Connector End Line Hoses are made from Type II orange SALCOR and can be used on 1, 1.25, or 1.5 I.D. conventional line hose. To connect 2 and 2.5 I.D. conventional line hose, use the SU System Connector. ASTM Class 2; Type II; 1.25 x 6 ; 9 lbs.