Cutting Tools in Kit | Aviation Snips Left: 10 in, Aviation Snips Right: 10 in, Aviation Snips Straight: (2) 10 in, Duckbill Straight: 7 in, Folding Pocket Knife: 8-3/4 in, Hacksaw High Tension: 12 in, Hacksaw Mini: 10 in, Safety Knife: 5-7/8 in, Tinners Snips Straight: 12-3/4 in, 14 in, Tubing Cutter, 6 in, Utility Knife Gray: 6 in |
Included | 664 - Sockets and Accessories; 241 - Wrenches; 51 - Striking and Struck Tools; 39 - Pliers; 91 - Screwdrivers; 172 - Miscellaneous Tools |
Kit Type | Master Tool Set |
Number of Inspection Tools in Kit | 7 |
Number of Lights | 2 |
Number of Misc Tools | 22 |
Number of Pieces | 1258 |
Number of Prybars and Pullers | 67 |
Number of Screwdrivers | 13 |
Number of Striking Tools | 50 |
Nut Drivers and Nutsetters in Kit | Nut Driver Fractional: 1/2 in x 2-3/4 in, 1/4 in x 2-3/4 in, 1-1/3 in x 2-3/4 in, 3/16 in x 2-3/4 in, 3/8 in x 2-3/4 in, 5/16 in x 2-3/4 in, 5/8 in x 2-3/4 in, 7/16 in x 2-3/4 in, 7/32 in x 2-3/4 in, 9/16 in x 2-3/4 in, 9/32 in x 2-3/4 in, Nut Driver: 4mm x 4 in, 5mm x 4 in, 5.5mm x 4 in, 6mm x 4 in, 7mm x 4 in, 8mm x 4 in, 9mm x 4 in, 10mm x 4 in, 11mm x 4 in, 12mm x 4 in, 13mm x 4 in, 14mm x 4 in |
Putty Knives and Scrapers in Kit | Carbon Scraper: 1 in, 1-1/2 in, Flex Putty Knife: (2) 1-1/4 in |
SAE or Metric | SAE and Metric |
Set Content | 664 - Sockets and Accessories; 241 - Wrenches; 51 - Striking and Struck Tools; 39 - Pliers; 91 - Screwdrivers; 172 - Miscellaneous Tools |
Striking Tools in Kit | Ball Pein Hammer: 8 oz, 16 oz, 32 oz, Center Punch: 4-7/8 in, 5-5/8 in, Cold Chisel: 1 in, 1/2 in, 1/4 in, 1-3/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/8 in, Dead Blow Hammer: 15 oz, 21 oz, 28 oz, 56 oz, Drift Punch: 1/4 in, 1/8 in, 3/16 in, Drive Pin Punch: 1/4 in x 6-3/4 in, Hammer Tip 1-1/2 in :, Extra Hard, Hard, Medium Hard, Medium, Soft, Super Soft, Tough, Hammer Tip 2-1/2 in : Extra Hard, Hard, Tough, Medium, Medium Hard, Chisel/Punch Holder, Nonsparking Sledge: 1-1/2 lb, Plastic Mallet, Prick Punch: 5 in, Punch Drive: 3/16 in, 3/32 in, 5/32 in, 7/32 in, Punch Drive Tip: 1/8 in, Soft Face Hammer: 13-1/2 in, 16-1/2 in, Starter Punch: 1/4 in x 6-1/2 in, 1/8 in x 5-1/8 in, 3/16 in x 5-5/8 in, 3/32 in x 5 in, 7/32 in x 6 in |
Tool Families | Cutting Tools, Deburring and Finishing Tools, Drilling, Extracting, and Tapping Tools, Electrical and Telecomm Tools, Hex and Torx Keys, Inspection and Retrieving Tools, Lights, Measuring Tools, Nut Drivers and Nutsetters, Pliers, Prybars and Pullers, Putty Knives and Scrapers, Screwdrivers, Sockets and Accessories, Striking Tools, Wrenches |
---|