LED Retrofit Tubes

T8 LED retrofit tube replaces a 25 to 32 watt T8 flourescent tube. A ballast is required to run this tube, check ballast compatibility chart to insure operation. Check ballast for dimmer compatibility. Max operating temperature of 113 F.

T5 LED retrofit tube replaces a 54 watt Hi output flourescent tube. This tube is ballast bypass with single or double ended wiring. It is non-dimmable with a frosted glass lens and a max operating temperature of 113 F.

14-watt, 48 inch, T8 LED bulb is an energy efficient lighting solution for a variety of applications. Retail spaces, hospitals, and educational venues can all realize the immediate benefits and savings LED lighting offers.

Field-adjustable power and color temperature; Replacement for conventional fluorescent T8 and T12 linear tubes; Integral driver enables lamp to be wired directly to line voltage without need for an external driver or ballast; Interchangeable base type R17D or FA8 Double-ended wiring method

T8 LED retrofit tube replaces a 32 watt T8 flourescent. This tube is ballast bypass with double ended wiring. It is non-dimmable with a max operating temperature of 113 F.

Ballast by-pass - Double ended wiring, No ballast or external driver required, Direct wire 120-277V line voltage, All glass tube, Shatterproof coated - NSF approved, 40W; 59W Fluorescent equivalency, 43 watt T8 LED; Single pin base; 5000K; 50000 average rated hours; 5500 lumens

LED Hybrid T8 - Type A + Type B. Direct replacement or by-pass, System Performance: Ballast Compatible bare lamp is 12W; Ballast Bypass 13W, Solid state LED lighting, High efficacy, DLC Listed, Do not use with dimmers in by-pass mode. Check the ballast for dimming capability when using with a ballast. NSF Approved, PET coated glass tube, Protection from arcing, Bypass mode works wired as a single ended lamp on non-shunted sockets or as a double ended lamp on either shunted or non-shunted sockets

All glass tube, Direct wire 120-277V line voltage, NSF Approved, No ballast or external driver required, Built-in shock resistant circuit - (not hot until both ends are installed)

Satco's 48" (4 Foot) LED sign tube - part number S16404 (18T8/LED/HO-SIGN/48-840/BP). These LED retrofit tubes DO NOT require an external LED driver. The existing ballast must be bypassed. The S16404 delivers 2300 lumens of 4000K Cool White and runs on the universal voltage of 120-277V. For a 6500K Daylight option, please refer to the related products below. This tube consumes just 18 watts, for a total of 127 lumens per watt.

T5 LED retrofit tube replaces a 54 watt Hi output flourescent tube. This tube is ballast bypass compatible. Integrated thermal fuse at pins.

Direct Replacement - for use on Instant Start and Rapid Start ballasts with no rewiring required, Solid State LED lighting, High efficiency, DLC Listed, All glass tube

Ballast by-pass - Double ended wiring, No ballast or external driver required, Direct wire 120-277V line voltage, All glass tube, Shatterproof coated - NSF approved, 54W; 59W Fluorescent equivalency, 43 watt T8 LED; Single pin base; 4000K; 50000 average rated hours; 5500 lumens

Direct wire 120-277V line voltage, Double ended wiring, No ballast or external driver required, All glass tube, Shatterproof coated, NSF certified, 40 watt T8 LED; 5000K; Recessed Double Contact base; 50000 Average rated hours; 5500 Lumens

Direct Replacement - for use on Electronic ballasts with no rewiring required, Replaces F54T5/HO linear fluorescent lamps, High efficiency, NSF Approved, Integrated thermal fuse at pins

Rosted glass, 12W, 120 277V, 82 CRI, 1700 Lumens, 3500K CCT, 50000 life

4ft SubstiTUBE LED T5HE, frosted glass, 13W, 83CRI, 2000 Lumen, 3000K, 50000 life

4ft SubstiTUBE LED T5HE, frosted glass, 13W, 83CRI, 2000 Lumen, 3500K, 50000 life

4ft SubstiTUBE LED T5HE, frosted glass, 13W, 83CRI, 2100 Lumen, 4100K, 50000 life

4ft SubstiTUBE LED T5HE, frosted glass, 13W, 83CRI, 2100 Lumen, 5000K, 50000 life

2ft SubstiTUBE LED T5 HE, frosted glass, 7W, 83CRI, 1000 Lumen, 3000K, 50000 life

2ft SubstiTUBE LED T5 HE, frosted glass, 7W, 83CRI, 1000 Lumen, 3000K, 50000 life

2ft SubstiTUBE LED T5 HE, frosted glass, 7W, 83CRI, 1000 Lumen, 3000K, 50000 life

2ft SubstiTUBE LED T5 HE, frosted glass, 7W, 83CRI, 1000 Lumen, 3000K, 50000 life

All glass tube, Direct wire 120-277V line voltage, NSF Approved, No ballast or external driver required, Built-in shock resistant circuit - (not hot until both ends are installed)

Easy installation into existing troffers and fixtures with simple AC wire connections (US patent pending); Seamless installation with no re-wiring or pre-kitting of tombstones; Internal power supply for high reliability and efficacy; Power factor > 0.9

T8 LED retrofit tube replaces a 32 watt T8 flourescent tube. This can run with compatibile ballasts or is direct wire capable. Check ballast compatibility chart to insure operation. Do not use with dimmers in by-pass mode. Check the ballast for dimming capability when using with a ballast. Max operating temperature of 113 F.