Scopemeter Accessories

Is Compatible With Any Fluke Scopemeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, Or Other Voltage Measurement Device That Has The Following Features: Bnc Input Connectors Or If Using A Meter Convert The Banana Plugs To A Bnc Connector Using The Adapter Pm9081/001.

Probe Accessory Extension Set, For Use With Fluke Vps400 Series Probes

Rechargeable Nimh Battery Pack. Set Of Nimh Batteries Designed For Use With Fluke Scopemeter 190 And 190c Series, As Well As In The Fluke 430 Series.

2400 Mah Li-ion Battery For Fluke 190-series Ii

4800 Mah High Capacity Li-ion Battery For Fluke 190-series Ii

C120b Soft Carrying Case For 120b Series C120b, Soft Carrying Case For 120b Series. Works With The Fluke 120b Series Portable Oscilloscopes

The Meter Case Is Zippered With A Detachable Front Pouch That Accomodates The Fluke 120 Series Scopemeter Testtool Or A Handheld Dmm, Along With Both Main Instrument And Test Accessories.

Fluke Molded Transit Case For 1750 And 1760 3 Phase Power Quality Recorder.

Fluke Molded Transit Case For 1750 And 1760 3 Phase Power Quality Recorder.

Fluke - External Li-ion Battery Charger For Charging Bp290 Or Bc291 Outside The Instrument

Hook Clip Set, Included: (1) Red, (1) Gray Hook Clips, Number Of Pieces: 2, Maximum Voltage: 600 Vrms, Contact Material: Nickel Plated Steel, Wire Size: 2.5 Mm, Cat Iii 600 V Rated Per Iec 1010-2-031b, For Use With Stl 120 Shielded Test Leads, Vps40 And Tl75 Test Leads

Set Of Four Hook Clips (two Red And Two Gray). Compatible With Vps100, Vps101, Vps121 And All Vps200 Series Probes.

Hanging Hook, For Scopemeter 190-series Ii Test Tools

Accessory Set Enables Interconnection Of The Fluke Scopemeter 190 Series For Use In The Field Of Medical Imaging And Video Systems.

Safety-designed Interface Cable To Connect The Optically-isolated Serial Interface Port Of Scopemeter Or Power Quality Analyzer To A Standard Usb-interface On Your Pc For Use With Scopem 12x, 119x, Pqa, 43x

The Flukeview Software Communicates With Your Scopemeter Test Tool Via The Optically Isolated Usb Cable Oc4usb, Or The Optically Isolated Rs-232 Cable Pm9080 Connected To The Pc.

Dual Banana Plug 4 Mm Male To Female Bnc Adapter. The Set Consists Of Two Adapters.

Dual Banana Jack (female) To Male Bnc Adapter. The Set Consists Of Two Adapters. One Red (signal) And One Black (ground) 4-mm Banana Contact.

50 Ohm Coaxial Bnc Cable Set (3 X 1.5m). Each Set Consists Of Three Black Cables With Colored Bnc Male Connectors (red, Gray And Black) For Easy Identification.

50 Ohm Coaxial Bnc Cable Set (3 X 5m). Each Set Consists Of Three Black Cables With Colored Bnc Male Connectors (red, Gray And Black) For Easy Identification.

Male Bnc To Dual Female Bnc T-piece. Set Consists Of Two Adapters. Bb120 Shielded Banana To Bnc Adapter Is Required To Adapt To Scopemeter 120 Series Shielded Banana Jack Inputs.

Set Of Replacement Accessories For Stl120-iii And Vps40-iii Consisting Of: Ground Leads (2, Black), Safety Rating 600v Cat Iii Hook Clips (1 Red, 1 Grey), Safety Rating 600v Cat Iii And 2 Mm Add-on Testpins (1 Red, 1 Grey), 1000v Cat Ii.

Fluke -probe Accessory Replacement Set

Probe Accessory Replacement Set For Vps500 Oscilloscope Probes

Scc120b Software Soft Carry Case Accessory Kit 120b Series Scc120b, Software Soft Carry Case Accessory Kit 120b Series. Works With The Fluke 120b Series Portable Oscilloscopes

Scc190 Carrying Case, Flukeview Software & Optically Isolated Usb-cable. Special Value Accessory Kit For The Fluke 190-series, 225c And 215c Scopemeter Models.

Sp120b Screen Protector For 120b Series Sp120b, Screen Protector For 120b Series. Works With The Fluke 120b Series Portable Oscilloscopes

Set Of Two (one Red, One Gray) Double Insulated Silicone Shielded Test Leads For Noise Free Measurements. Specially Designed For Use With The Fluke Scopemeter 120 Series. Compatible With Ac120 Alligator Clips And Hc120 Hook Clips. Safety Designed Ground Leads Included. Integral Strain Relieve And Extra Hard Probe Tips Provide Extra Long Service Life. Features Safety Designed Shrouded Plugs And Notched Tip To Prevent Probe From Sliding.

Industrial Shielded, 1:1, Silicone Insulated Test Lead Set. Useful Bandwidth 1 Mhz. Silicone Insulated Leads Won't Crack From Cold Or Melt From Accidental Contact With Hot Surfaces. Superior Strain Relief And Flexibility Provide Extra Long Life. Compatibl

Bnc Feedthrough 50 I Terminator (set Of 2 Pieces, Black) For The 190 Series Ii Scopemeter Oscilloscopes

Ua120 Usb Connector Adapter Ua120b, Usb Connector Adapter. Works With The Fluke 120b Series Portable Oscilloscopes

Voltage Probe Set, Voltage Rating: 300 V Maximum Input, 600 V Maximum Voltage To Ground, Length: 1.2 Mr Cable, Cat Iii 300 V, Cat Iii 600 V Per Iec/en61010-031, For Scopemeter 190 Series Test Tools

Voltage Probe, 10:1, With Safety-designed Shrouded 4mm Testpin, For Use With 120 Series Scopemeter. Hook Clip And Ground Lead Included. The Shrouded 4mm Banana Testpin Makes This Probe Also Compatible With Standard Safety-designed Alligator Clips (like E

Voltage Probe Set 40 Mhz 600v Cat Iv. Works With The Fluke 120b Series Portable Oscilloscopes

Ruggedized High-working Industrial Scopemeter Voltage Probe Set Blue, 10

Ruggedized High-working Industrial Scopemeter Voltage Probe Set Grey, 10

Scopemeter Voltage Probe-set, Red, 10:1, 300 Mhz, 1000v Cat Iii, 600v Cat Iv

Ruggedized High-working Industrial Scopemeter Voltage Probe Set Green, 10

Scopemeter Compact Probe For Electronic Applications, Blue, 10:1, 500 Mhz, 300 V Cat Iii

Scopemeter Compact Probe For Electronic Applications, Grey, 10:1, 500 Mhz, 300 V Cat Iii

Scopemeter Compact Probe For Electronic Applications, Red, 10:1, 500 Mhz, 300 V Cat Iii

Scopemeter Compact Probe For Electronic Applications, Green, 10:1, 500 Mhz, 300 V Cat Iii