Process Calibration Accessories

High Pressure Premium Fittings 21 Mpa (3000 Psi); For Metric Fittings

The Fluke Calibration High Pressure Fittings Kit Provides Additional Fittings For Use When Performing High Pressure Pneumatic Pressure Calibrations

The Fluke Calibration Calibration Manifold Provides The Functionality Necessary To Easily Perform Pressure Calibrations With An External Gas Supply.

High Pressure Pneumatic Test Pump, 21 Mpa (3000 Psi), Bsp; Generate And Adjust Pneumatic Pressures Up To 21 Mpa (3000 Psi); Rugged, Portable And Stable Enough To Go Anywhere -- On Any Surface; Reaches Pressure In 20 Seconds To Full Scale Into A 10 Cm3 Volume; Detachable Pressure Adjustment System For Adjusting Pressure, Connecting Reference And Test Devices On Bench And In The Field, And Isolating And Venting Pressure

Detachable Pressure Adjustment System For Adjusting Pressure, Connecting Reference And Test Devices, And Isolating And Venting Pressure; Generate And Adjust Pneumatic Pressures Up To 21 Mpa (3000 Psi); Easily Switch Out Reference Gauges Without Requiring Ptfe Tape Or Tools; Rugged, Portable And Stable Enough To Go Anywhere, On Any Surface; Maximum Working Pressure: 21 Mpa, 3000 Psi

Detachable Pressure Adjustment System For Adjusting Pressure, Connecting Reference And Test Devices, And Isolating And Venting Pressure; Generate And Adjust Pneumatic Pressures Up To 21 Mpa (3000 Psi); Easily Switch Out Reference Gauges Without Requiring Ptfe Tape Or Tools; Rugged, Portable And Stable Enough To Go Anywhere, On Any Surface; Maximum Working Pressure: 21 Mpa, 3000 Psi; Time To Generate Full Scale Pressure With 10 Cc Volume(s): 20 Seconds; Weight: 7.2 Kg (15.8 Lbs)

The Fluke Calibration 700hppk Pneumatic Test Pump Kit Generates And Adjusts Pneumatic Pressures Up To 21 Mpa (3000 Psi), Without Requiring A Nitrogen Bottle Or Other External Pressure Supply. It Supplies Pressure To Devices Under Test (duts) That Include Transmitters, Controllers, Pilots, Digital And Analog Gauges, And More. It?s The Perfect Solution For Generating High Pressure In The Field, Where Conditions And Operating Surfaces Can Vary.

Detachable Pressure Adjustment System For Adjusting Pressure, Connecting Reference And Test Devices, And Isolating And Venting Pressure; Generate And Adjust Pneumatic Pressures Up To 21 Mpa (3000 Psi); Easily Switch Out Reference Gauges Without Requiring Ptfe Tape Or Tools; Rugged, Portable And Stable Enough To Go Anywhere, On Any Surface; Maximum Working Pressure: 21 Mpa, 3000 Psi; Time To Generate Full Scale Pressure With 10 Cc Volume(s): 20 Seconds

The Fluke Calibration 700hpp Pneumatic Test Pump Generates Pneumatic Pressures Up To 21 Mpa (3000 Psi), Without Requiring A Nitrogen Bottle Or Other External Pressure Supply. It Supplies Pressure To Devices Under Test (duts) That Include Transmitters, Controllers, Pilots, Digital And Analog Gauges, And More. It?s The Perfect Solution For Generating High Pressure In The Field, Where Conditions And Operating Surfaces Can Vary.

The Fluke Hart Communications Software Enables You To Upload Process Data To A Pc.

Precision Process Calibrator, 115v With Operating Range Of 0 Dec C To 50 Deg C.

For Use With 7526a Process Calibrator

You?re Going To Love What We?ve Done With Your Calibrator. The 754 Is Everything You Needed And Wished For In The 744 And More. Hart Communication Capability Is Combined To Deliver An Integrated Communicating Calibrator. This Rugged, Reliable Tool Is Idea

Insert A: 3/8, Three 1/4, 3/16, 1/8

Insert B: Two 3/8, Two 1/4, Two 3/16

Insert C: Six 1/4

Insert D: Two 6mm, Two 4mm, Two 3mm

Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm

Insert F: 6mm, 1/4, Two 4mm, Two 3mm

Ea Test Insert For Low-temperature Dry-well Field Calibrator. Temperature Range -25 Deg C To 150 Dec C.

Test Insert With Temperature Range -25 Deg C To 150 Deg C.

Insert For 9142 Field Metrology Wells Calibrators, Type Z, Blank

Insert A: 3/8", Two", 3/16", 1/8"

Insert B: 3/8", Two", Two 3/16", 1/8"

Insert C: Four ?"

Insert D: Two 6mm, Two 4mm, Two 3mm

Insert E: 10mm, 8mm, 6mm

Insert F: 6mm, 1/4", Two 4mm, Two 3mm

Ea Test Insert For Mid-temperature Dry-well Field Calibrator. Temperature Range 33 Deg C To 350 Dec C.

Test Insert With Temperature Range 33 Deg C To 350 Deg C.

9143 Blank Insert

Insert, A, 9144, 3/8", Two", 3/16", 1/8"

Insert, B, 9144, Cmp Hls 3/8", Two", Two 3/16", 1/8"

Insert, C,9144, Four 0.25 In Hls : Four"

Insert, D,9144, Metric, Misc Hls Two 6mm, Two 4mm, Two 3mm

Insert, E,9144, Metric,0.25 In Ref,misc Hls 10mm, 8mm, 6mm, 4mm

Insert, F,9144, Metric,0.25 In Ref,cmp Hls : 6mm, 1/4", Two 4mm, Two 3mm

This Inserts Are Ordered With 9144 Series Metrology Well Calibrators Accommodating A Variety Of Metric- And Imperial-sized Probe Diameters.

This Inserts Are Ordered With 9144 Series Metrology Well Calibrators Accommodating A Variety Of Metric- And Imperial-sized Probe Diameters.

Insert, Blank, 9144 With A Temperature Range Of 50 Dec C To 660 Deg C.

Carrying Case For The 9170 Series Metrology Well Calibrators. Laminated Birch Or Lightweight Composite Panels. Recessed Steel Handles And Latches. Foam Lined For Impact Protection.

Insert A: 3/8", Three", 3/16", 1/8" Misc Hls 9170

Insert B: Two 3/8", Two", Two 3/16" Cmp Hls 9170

Insert C: Six" , Four 0.25 In Hls 9170

Insert D: Two 6mm, Two 4mm, Two 3mm Metric, Misc Hls 9170

Insert E: 10mm, 8mm, 6mm, 4mm, 3mm Metric,0.25 In Ref,misc Hls 9170

Insert F: 6mm, 1/4", Two 4mm, Two 3mm Metric,0.25 In Ref,cmp Hls 9170

Insert, Blank, 9170 With Temperature Range Of -45 Deg C To 700 Deg C