Electronic Deadweight Tester, 14 MPA (2k Psi)
E-dwt-h A14m Configuration; Pressure Range 1.4 To 14 Mpa, 200 To 2,000 Psi; ? 0.02 % Of Reading Total One-year Accuracy, 0.025% For Two Years; Low Torque Variable Volume Allows For Pressure Generation And Control Up To 200 Mpa (30,000 Psi) With Minimal Physical Effort; Built-in Priming System To Fill System With Test Fluid And Purge Unwanted Air To Assure Smooth Operation
Brand
Fluke
Mfr. Part#
6531-14M
Customer Part#
Campbell Part#
FLU6531-14M
| Communication ports | RS-232 (COM1, COM2) |
|---|---|
| Operating Temperature Range | 10 ?C to 40 ?C (50 ?F to 104 ?F) |
| Power requirements | To RPM4-E-DWT: 12 V dc 1.2 A; To ac to dc power supply: 100 V ac to 240 V ac, 50/60 Hz |
| Relative operating humidity | 0 % to 70 % |
| Relative storage humidity | 0 % to 100 % |
| Reservoir capacity | 300 cc (18 in 3 ) |
| Storage temperature range | -20 ?C to 70 ?C (-4 ?F to 158 ?F) (must be above freezing point and below boiling point of test medium) |
| Weight | E-DWT with 1 Q-RPT: 12 kg (26 lb) approximate; E-DWT with 2 Q-RPTs: 14 kg (30 lb) approximate |
Specification Sheet