How can we get better? Print

Enclosure Pockets

9 Results Found
per page
  1. 12x12 Print Pocket
    12 x 12 x 2.5 Print Pocket
    Detailed Description Less
    Brand
    Hammond
    Mfr. Part#
    PKT1212
    Campbell Part# HAMPKT1212
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $20.14 ea
    Est. Lead Time: 15 Bus. Days
  2. Pocket, Exterior Print
    Designed for use on the exterior of an enclosure or door to keep prints clean and easy to access. Exterior print pockets have a hinged cover with cable stops to hold the door at 90 degrees open position and black quarter turn latches. Made of steel and finished with RAL 7035 gray powder coating.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-13ELJEXPP
    Campbell Part# SCE-13ELJEXPP
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $181.23 ea
    Est. Lead Time: 15 Bus. Days
  3. Pocket, Exterior Print
    Designed for use on the exterior of an enclosure or door to keep prints clean and easy to access. Exterior print pockets have a hinged cover with cable stops to hold the door at 90 degrees open position and black quarter turn latches. Made of steel and finished with RAL 7035 gray powder coating.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-19ELJEXPP
    Campbell Part# SCE-19ELJEXPP
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $181.23 ea
    Est. Lead Time: 15 Bus. Days
  4. CD Pocket Storage Media
    Designed to provide storage for electronic media. Padlockable. This pocket is not fire proof. Made from steel and powder coated white epoxy polyester.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-CDPK
    Campbell Part# SCE-CDPK
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $133.80 ea
    Est. Lead Time: 15 Bus. Days
  5. Disk Pocket Storage Media
    Designed to provide storage for electronic media. Padlockable. This pocket is not fire proof. Made from steel and powder coated white epoxy polyester.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-DISKPK
    Campbell Part# SCE-DISKPK
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $133.80 ea
    Est. Lead Time: 15 Bus. Days
  6. Pocket, Print
    Designed to provide storage for prints on the interior of an enclosure. Intended for use as a replacement or as an additional pocket. Made from white Polypropylene material.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-PP101201
    Campbell Part# SCE-PP101201
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $31.53 ea
    Est. Lead Time: 15 Bus. Days
  7. Pocket, Extra Deep Print
    Designed to provide storage for prints on the interior of an enclosure. Intended for use as a replacement or as an additional pocket. Made from steel and powder coated white.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-PP101203
    Campbell Part# SCE-PP101203
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $34.70 ea
    Est. Lead Time: 15 Bus. Days
  8. Print Pocket, 11 x 14 Binder Cover
    Designed to provide storage for prints on the interior of an enclosure. Intended for use as a replacement or as an additional pocket. Made from steel and powder coated white.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-PP1212
    Campbell Part# SCE-PP1212
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $48.07 ea
    Est. Lead Time: 15 Bus. Days
  9. Pocket, Print
    Designed to provide storage for prints on the interior of an enclosure. Intended for use as a replacement or as an additional pocket. Made from white Polypropylene material.
    Detailed Description Less
    Brand
    Saginaw Control
    Mfr. Part#
    SCE-PP7701
    Campbell Part# SCE-PP7701
    Qty:
    Min. Qty:
    1 ea
    Qty Intervals:
    1 ea
    $28.38 ea
    Est. Lead Time: 15 Bus. Days
9 Results Found
per page
Search engine powered by ElasticSuite