Enabling Devices & Accessories

Bottom part with cable gland and PCB with 16 screw connections.

Adaptation unit for dynamic circuits. Tina 2B with cable for internal assembly in emergency stops and other safety sensors with potential free contacts.

Three-position device incl. LEDs.

Bottom part with M12 connection (5 poles).

Item,Enabling Device Bottom Part;

Three-position device.

Three-position device incl. LEDs, front button and top button.

Accessories Safeball. Ball & socket for flexible mount for mounting the Safeball to Enclosures, machines or table tops.

JSTD1-A Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 2 meters molded cable.

JSTD1-B Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 0.2m wires x 4 for direct connection into an enclosure.

JSTD1-C Safeballs each have 1NO & 1NC independent switches, maximum load of 30VDC - 2A resistive. Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection degree, plastic body, 10 meters molded cable.

Tina 1A is a device that is designed for use with the connection block Tina 4A or 8A, where it is used as a blind plug in unused M12 connections.

Adaptation unit for dynamic circuits. Tina 2A is with M20 fitting for connection of emergency stops and other safety devices having a suitable combination of potential free contacts.

Adaptation unit for dynamic circuits. Tina 3A with M12 connection and M20 fitting for use with emergency stop and other safety sensors with potential free contacts.

Connection block with adaptation unit for dynamic circuits. Four M12 5-pole connectors for sensor input. Each sensors information status can be wired separatly. Cable connection diameter range: 7?12 mm.

Connection block with adaptation unit for dynamic circuits. Eight M12 5-pole connectors for sensor input. Each sensors information status can be wired separatly. Cable connection diameter range: 7?12 mm.

Adaptation unit for dynamic circuits. Tina 6A with M12 male and female connectors for safety mat/strip/bumper connection.

Adaptation unit for dynamic circuits. Tina 7A for installation on DIN rails in Electrical cabinets. Electrical connection via detachable terminal blocks. Tina 7A is used for emergency stops in the same Electrical cabinet.

Connection block with adaptation unit for dynamic circuits. Two M12 5-pole connectors for sensor input.

5 pole M12 female field retro-fittable connector with screw terminals for connecting wires, cable diameter range 2.5 to 6.5 mm

5 pole M12 male field retro-fittable connector with screw terminals for connecting wires, cable diameter range 2.5 to 6.5 mm

8 pole M12 female field retro-fittable connector with screw terminals for connecting wires, cable diameter range 2.5 to 6.5 mm

8 pole M12 male field retro-fittable connector with screw terminals for connecting wires, cable diameter range 2.5 to 6.5 mm

Cable single ended 6 meters black PVC jacket with straight 5 pole M12 female molded connector, 22AWG conductors, overall braid shield

Cable single ended 10 meter black PVC jacket with straight 5 pole M12 female molded connector, 22AWG conductors, overall braid shield

Cable single ended 20 meter black PVC jacket with straight 5 pole M12 female molded connector, 22AWG conductors, overall braid shield

Extension cable 1 meter, black PVC jacket with straight 5 pole M12 male/female connectors, 22AWG conductors, overall braid shield

Extension cable 3 meters, black PVC jacket with straight 5 pole M12 male/female connectors, 22AWG conductors, overall braid shield

Extension cable 6 meters, black PVC jacket with straight 5 pole M12 male/female connectors, 22AWG conductors, overall braid shield

Extension cable 10 meters, black PVC jacket with straight 5 pole M12 male/female connectors, 22AWG conductors, overall braid shield

Extension cable 20 meters, black PVC jacket with straight 5 pole M12 male/female connectors, 22AWG conductors, overall braid shield

Cable single ended 6 meters black PVC jacket with straight 8 pole M12 female molded connector, 22AWG conductors, overall braid shield

Cable single ended 10 meters black PVC jacket with straight 8 pole M12 female molded connector, 22AWG conductors, overall braid shield

Cable single ended 20 meters black PVC jacket with straight 8 pole M12 female molded connector, 22AWG conductors, overall braid shield

Extension cable 3 meter, black PVC jacket with straight 8 pole M12 male/female connectors, 22AWG conductors, overall braid shield

Identifier, read only

Identifier, read/write

External program memory, 2.5 kbyte

External program memory, 10 kbyte

Gateway for 2-way communication between the Pluto bus and CANopen