Square D by Schneider Electric

NEMA rated A600-P600 #12 to 24 AWG wire range allows use of more common small wire sizes. Terminals are at 20 angle to eliminate interference with other contact blocks mounted in tandem. Feature double-break fine silver contacts with wiping action.

Schneider Electric,Screw terminal,2pts,2.5 millimeter grey,1000 Volt conforming to EN/IEC 60947-7-1-690 V conforming to ATEX Exe II Ex II 2 GD, 600 Volt cURus,47.5 millimeter, Linergy, Spacial enclosures, terminal block, set of 50

Schneider Electric,30MM PUSH BUTTON FULL GUARD,30mm Round,600V,Harmony,Momentary,NEMA 1/2/3/3R/4/6/12/13,No Contact Blocks,Panel,Pushbutton,Standard Pushbutton,UL File Number E42259 CCN NKCR - CSA File Number LR24590 Class 3211-03 - CE Marked,Universal (Contains 1 of each: Black,Red,Green,Yellow,Orange,Blue and White),Water tight,Dust tight and Oil tight (Indoor/Outdoor)

Schneider Electric,Screw terminal,2pts,6mm grey,600 V conforming to EN/IEC 60947-7-1-352 V conforming to ATEX Exe II Ex II 2 GD-150 V cURus,65.4 mm,Linergy,Spacial enclosures,terminal block,set of 50,terminal block

Add-On Contact Block (TeSys) Front Mount, Instantaneous Auxiliary Contacts (1 NO - 1 NC)

Number of Poles,1;Locking Provision,On/Off;Used On,QO Series Circuit Breaker

Lug Type,Neutral;Conductor Size,6 to 2/0 AWG;Conductor Material,Aluminum/Copper;Used On,QO Loadcenter

Schneider Electric,Spring terminal,Ground,3pts,2,5mm,60.5 mm,Linergy,Spacial enclosures,terminal block,set of 50,terminal block

Lug Type,Neutral Lug;Current Rating,70 Amp;Wire Size,10 to 2 AWG (Aluminum)/14 to 4 AWG (Copper);Used On,NF Panelboard

Voltage Rating,120/240 Volt AC at 50/60 Hertz;Interrupting Rating,10 Kiloamp;Terminal Type,Box Lug;Wire Size,8 to 2 AWG (Aluminum/Copper);Mounting,Plug-On;Used On,QO Loadcenter, NQOD Panelboard, OEM Interior/Speed-D Switchboard Distribution Panel;Size,1.5" W x 2.91" D x 3" H;Approval,UL, CSA

Schneider Electric,NAMEPLATE (U,30mm x 40mm,Harmony,UP,direct,labelling control units

Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 2.5 mm² nominal cross section. The Rated operational voltage is 600V conforming to CSA/cURus, 500V conforming to EN/IEC 60947-7-1 and 352V conforming to ATEX Exe II Ex II 2 GD. The Rated current is 24A conforming to EN/IEC 60947-7-1, 20A conforming to CSA/cURus and 20A conforming to ATEX Exe II Ex II 2 GD. It has grey surface treatment. Mounting by clip-on and sideways connection by single-level 1x1 screw terminals. It could be connection and disconnection by screwdriver. It is compatible with spacial enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in lots of 50 units. Ambient air temperature for operation is from -40 to 130 °C conforming to IEC 60216-1 and VDE 0304-T21. Multi standards certified (ATEX, CSA, cURus, DNV, GL, LR, VDE, IEC-Ex, EAC). It is compliant with Green Premium (RoHS/REACH).

TeSys D Non-Reversing Contactor 3-Pole (3 NO) 120Vac@50/60Hz

Voltage Rating,120/240 Volt AC at 50/60 Hertz;Interrupting Rating,10 Kiloamp;Terminal Type,Pressure Plate;Wire Size,14 to 8 AWG (Aluminum/Copper);Mounting,Plug-On;Used On,QO Loadcenter, NQOD Panelboard, OEM Interior/Speed-D Switchboard Distribution Panel;Size,0.75" W x 2.91" D x 3" H;Approval,UL, CSA

Schneider Electric,SEL SWITCH,22mm Round,Black Unmarked,Harmony,IP 65,Momentary (Both Sides to Center),NEMA 1/2/3/4/4X/13,Non-Illuminated,Selector Switch Operator,Standard Knob: 3 Position,UL Listed File Number E164353 CCN NKCR - CSA Certified File Number LR44087 Class 321103 - CE Marked

Schneider Electric,Plug-in Bridge,5pts for 2,5mm terminal,Linergy,connection accessory,plug-in bridge,set of 50

Length,9.44";Conductor Material,Aluminum/Copper;Terminal Size,(1) 14 to 4 AWG/(2) 14/12 AWG (Copper), (1) 12 to 4 AWG/(2) 12/10 (Aluminum);Number of Circuits,23;Used On,Homeline Circuit Breaker and Loadcenter

Linergy NSYTR cover plate for terminal block. It is compatible with TRV screw terminal block. It has grey surface treatment. For screw double-level terminal block 1x1, 2.5 to 4mm². Sold in lots of 50 units. It is compliant with Green Premium (RoHS/REACH).

AC Drive 116.0A, Variable Torque, IP20, Size 8A, 400/480 Vac, 55kW, (Altivar 212)

Schneider Electric,24V BA9s BASE MARKED CM8-A231,2.6,22mm illuminated control units,24 V,BA9 incandescent,Clear,Harmony,direct

Schneider Electric,NAMEPLATE (D,30mm x 40mm,DOWN,Harmony,direct,labelling control units

Schneider Electric,PENDANT STATION BOOTED OPERATOR XAC,Black,EN/IEC,UL,CSA,Harmony,booted,for pushbutton,front

Socket RUZ - mixed contact - 10 A - < 250 V - connector - for relay RUMC2..

Voltage Rating,120/240 Volt AC;Interrupting Rating,10 Kiloamp;Terminal Type,Screw Clamp;Wire Size,14 to 8 AWG (Aluminum/Copper);Mounting,Plug-On;Used On,Homeline Loadcenter;Approval,UL, CSA

Terminal Block Grounding, Green/Yellow

Plug-In Relay Plug-In Socket (DIN rail or Flange with adapter), SPDT, 24 VDC, 15A@250VAC - 15A@28VDC, Flat/Spade (Faston Type), Lockable Test Button

Schneider Electric,End Cover,3pts,for NSYTRR23 terminals,Linergy,insulation accessory,cover plate,set of 50

This Harmony ZB, white light block operates with an integral LED. It is supplied with 24V AC/DC and uses spring terminals. It has a plastic body. It is compatible with Harmony XB4 and XB5. This light block allows fast and easy replacement and configuration of your signaling units. It is easily installed and replaced on compatible Illuminated push-button or selector switch units via clip together assembly and connected with simple screw-clamp connections. It enables visual distinction of signaling units via illumination by integral LED. It protects operators from unexpected contact with live circuits thanks to its IP20 protection index. Its wide range of operating temperatures from -40°C to 70°C allows versatility in usage of product.

Schneider Electric,BLK ASSM,1 NO,10A,600V,A600 - Q600,Electrical Component Contact Block,Harmony,Screw Clamp

Multi 9 Circuit Breaker C60BP - 1P - 2 A - C Curve - 120/240/277 VAC - Max 14 KA - UL 489

Voltage Rating,120/240 Volt AC;Interrupting Rating,10 Kiloamp;Terminal Type,Screw Clamp;Wire Size,14 to 8 AWG (Aluminum/Copper);Mounting,Plug-On;Used On,Homeline Loadcenter;Approval,UL, CSA

Voltage Rating,120/240 Volt AC at 50/60 Hertz;Interrupting Rating,10 Kiloamp;Terminal Type,Box Lug;Wire Size,8 to 2 AWG (Aluminum/Copper);Mounting,Plug-On;Used On,QO Loadcenter, NQOD Panelboard, OEM Interior/Speed-D Switchboard Distribution Panel;Size,1.5" W x 2.91" D x 3" H;Approval,UL, CSA

AC Drive 160.0A, Variable Torque, IP20, Size 8A, 400/480 Vac, 75kW, (Altivar 212)

Schneider Electric,CONTACT BLOCK,-25 to +70 Degrees C,1,1 NO,10A,22mm,600V,AC15 - DC13,Contact Block,For 22mm XB4 and XB5 Signaling Units,Harmony,Screw Clamp,UL Listed File Number E164353 CCN NKCR - CSA Certified File Number LR44087 Class 321103 - CE Marked

Length,9.36";Conductor Material,Aluminum/Copper;Terminal Size,(1) 1 to 4/0 AWG (Aluminum/Copper);Number of Circuits,27;Used On,Homeline Circuit Breaker and Loadcenter

This Harmony ZB, XB5 single contact block contact block uses spring clamp connection. This contact block allows fast and easy replacement and configuration of your push buttons and selector switches. It is easily installed and replaced on XB5 complete push-button units and selector switches via a clip assembly and connects to control circuits with simple screw-clamp connections. It protects operators from unexpected contact with live circuits thanks to its IP20 protection index. 1 million cycle high endurance under 6A load allows less maintenance and damage in your installation. It has clear color scheme for NO and NC contact block types. Vibration resistant screw clamp connection terminals ensure high vibration resistance making product suitable installation on high impact machine.

Metal maintaining clamp - for relay socket RUZ

Socket RUZ - mixed contact - 10A - < 250V - connector -for relay RXM2.., RUMC3..

Terminal Block Standard, 40A, 35 Sections, Natural

Length,6.56";Conductor Material,Aluminum/Copper;Terminal Size,(1) 14 to 4 AWG/(2) 14/12 AWG (Copper), (1) 12 to 4 AWG/(2) 12/10 (Aluminum);Number of Circuits,18;Used On,Homeline Circuit Breaker and Loadcenter

Harmony 22 mm modular push buttons, selector switches, pilot lights are designed for industry. This range combines simplicity of setup, flexibility and a robust construction. An ingenious locking system consisting of a snap fit head and body that can be tightened with a single screw but still ensuring an easy and yet secure mounting. Harmony XB4/ZB4 are 22 mm chromium plated metal modular push buttons, selector switches and pilot lights connecting to fully metal mounting collar. The operators can be purchased as complete operators or various modules that can be assembled to meet the user’s specific requirement. Harmony XB5/ZB5 are 22 mm plastic modular push buttons, selector switches, pilot lights. The operator can have a round and square plastic bezel. The contacts can be used for low load electrical contact and high power applications. Shake proof connection screws make periodic retightening unnecessary. A complete set of accessories to provide a solution for applications where exposure to high pressure cleaning, dust and extreme temperatures is an everyday occurrence. These harmony 22mm push buttons are used by machine manufacturers (automotive, textiles, timber) and control system panel builders. Certified and approved for meeting requirements throughout all continents: EN/IEC, UL, NEMA, CSA, CCC, Gost, JIS and many more. They have UL and CE markings and have ratings up to IP66 and IP69K.

This Zelio RXZ maintaining clamp has a metal body. It is compatible with miniature relay sockets RXZE1M2C and RXZE1M4C. This mounting accessory is ideal to secure the relay socket in place. It can be matched with any relay socket from RXZ range.

This Harmony ZB2BY9330 is a legend diameter 60mm, EMERGENCY STOP. It is an accessory of the range Harmony XAC pendant control stations for diameter 22mm plastic signaling units.

TeSys D Non-Reversing Contactor 3-Pole (3 NO) 24Vdc