Satco

T5 LED retrofit tube replaces a 54 watt Hi output flourescent tube. This tube is ballast bypass with single or double ended wiring. It is non-dimmable with a frosted glass lens and a max operating temperature of 113 F.

Lumens: 750; Wattage: 9.5 Watt; Kelvin Temperature: 2700k; Dimmable: Yes; Average Life (hrs): 25000; Shape: Br30; Cri: 80; Base: Medium; Voltage: 120

10 watt C7 Incandescent; Clear; 2500 average rated hours; 60 lumens; DC Bay base; 130 volts

Ballast by-pass - Double ended wiring, No ballast or external driver required, Direct wire 120-277V line voltage, All glass tube, Shatterproof coated - NSF approved, 40W; 59W Fluorescent equivalency, 43 watt T8 LED; Single pin base; 5000K; 50000 average rated hours; 5500 lumens

White Finish 2.59 Inches High 5.5 Inches Wide LED - 40 Watt Linear LED Module Bulbs, Weight: 4.32 LBS, Interior Damp Rated

LED Hybrid T8 - Type A + Type B. Direct replacement or by-pass, System Performance: Ballast Compatible bare lamp is 12W; Ballast Bypass 13W, Solid state LED lighting, High efficacy, DLC Listed, Do not use with dimmers in by-pass mode. Check the ballast for dimming capability when using with a ballast. NSF Approved, PET coated glass tube, Protection from arcing, Bypass mode works wired as a single ended lamp on non-shunted sockets or as a double ended lamp on either shunted or non-shunted sockets

Beam Spread - Closed 260 Degree; Partial 150 degree; Open 120 Degree, Rated For Enclosed Fixture, Damp Location IP Rating - IP64

All glass tube, Direct wire 120-277V line voltage, NSF Approved, No ballast or external driver required, Built-in shock resistant circuit - (not hot until both ends are installed)

LED 2' Connectable Strip - 24 Watt - 4000K - White Finish - 120 Volts

T5 LED retrofit tube replaces a 54 watt Hi output flourescent tube. This tube is ballast bypass compatible. Integrated thermal fuse at pins.

LED 4' Strip Light - 24 Watt - White Finish - 100-277 Volts

Direct Replacement - for use on Instant Start and Rapid Start ballasts with no rewiring required, Solid State LED lighting, High efficiency, DLC Listed, All glass tube

Ballast by-pass - Double ended wiring, No ballast or external driver required, Direct wire 120-277V line voltage, All glass tube, Shatterproof coated - NSF approved, 54W; 59W Fluorescent equivalency, 43 watt T8 LED; Single pin base; 4000K; 50000 average rated hours; 5500 lumens

Direct wire 120-277V line voltage, Double ended wiring, No ballast or external driver required, All glass tube, Shatterproof coated, NSF certified, 40 watt T8 LED; 5000K; Recessed Double Contact base; 50000 Average rated hours; 5500 Lumens

Replaces 90 Watt Incandescent

Beam Spread - Closed 260 Degree; Partial 150 degree; Open 120 Degree, Rated For Enclosed Fixture, Damp Location IP Rating - IP64, DLC Listed

Indoor LED shop light that is non-dimmable. Can daisy chain multiple of these fixtures together via power cord.

Replaces 60 watt incandescent. Dimmable LED Bulb has a medium base warm white color temperature with frosted lens. Produces 800 lumens of light at a 220 degree beam angle

LED, A19, 2W, Red, 15000 life

9W LED PL 4-Pin; 4000K; 1000 Lumens; G24q base; 50000 Average rated hours; 120 Deg. beam spread

Solid state LED lighting, Long life, Approved for enclosed fixtures, Damp location rated

High Lumen Omni-directional LED for Industrial / Commercial applications, Replaces HID, CFL, and Incandescent, Ballast by-pass - Direct wire only 100V - 277V, UL approved for totally enclosed fixtures, Damp location - IP65 rated, For outdoor & indoor use, DLC Listed, Base up, base down or horizontal operation, Emits no UV light / Contains no mercury (Hg)

Direct Replacement - for use on Electronic ballasts with no rewiring required, Replaces F54T5/HO linear fluorescent lamps, High efficiency, NSF Approved, Integrated thermal fuse at pins

All glass tube, Direct wire 120-277V line voltage, NSF Approved, No ballast or external driver required, Built-in shock resistant circuit - (not hot until both ends are installed)

(54W/LED/HID/5000K/100-277V/EX39) High Lumen Omni-directional LED for Industrial / Commercial applications, Replaces HID, CFL, and Incandescent, Ballast by-pass - Direct wire only 100V - 277V, UL approved for totally enclosed fixtures, Damp location - IP65 rated, For outdoor & indoor use, DLC Listed, Base up, base down or horizontal operation, Emits no UV light / Contains no mercury (Hg), Non-Dimmable

(100W/LED/HID/5000K/100-277V/EX39) High Lumen Omni-directional LED for Industrial / Commercial applications, Replaces HID, CFL, and Incandescent, Ballast by-pass - Direct wire only 100V - 277V, UL approved for totally enclosed fixtures, Damp location - IP65 rated, For outdoor & indoor use, DLC Listed, Base up, base down or horizontal operation, Emits no UV light / Contains no mercury (Hg), Non-Dimmable

(22W/LED/HID/5000K/100-277V/E26) High Lumen Omni-directional LED for Industrial / Commercial applications, Replaces HID, CFL, and Incandescent, Ballast by-pass - Direct wire only 100V - 277V, UL approved for totally enclosed fixtures, Damp location - IP65 rated, For outdoor & indoor use, Base up, base down or horizontal operation, Emits no UV light / Contains no mercury (Hg), Non-Dimmable

LED retrofit for outdoor wallpacks & flood lights. Ballast Bypass-Direct wire only 100-277V. Equivalent to a 250 watt HID. Minimum compartment size length 11" x width 8", height 8"

Ballast Bypass-Direct wire only 100-277V. Equivalent to a 150 watt HID or 200 watt incandescent. Minimum compartment size length 6" x width 8.5", depth 6".

Temporary hanging LED light is linkable up to 6 sets. Max operating temperature of 140 F. Orange finish with frosted plastic lens.

Replaces a 50 watt halogen. Bi-pin GU10 base with a 40 degree beam angle. Finish is an array white color.

Replaces a 50 watt halogen 12 volt AC/DC. Bi-pin GU5.3 base with a 40 degree beam angle. Finish is a silver back.