Pfannenberg

Features of Pfannanberg's 4th Generation Filterfan Series: Reduced Energy Consumption-More air, less power consumption, Patened Tool-less 4 corner fastening system, Highest system airflow in industry- via optimized louvres, 300% longer service time via patented fluted filter mat- this saves time and money, Aesthetically pleasing design using neutral colors- Perfect harmony of colors with modern machines and plants

Features of Pfannanberg's 4th Generation Filterfan Series: Reduced Energy Consumption-More air, less power consumption, Patened Tool-less 4 corner fastening system, Highest system airflow in industry- via optimized louvres, 300% longer service time via patented fluted filter mat- this saves time and money, Aesthetically pleasing design using neutral colors- Perfect harmony of colors with modern machines and plants

Features of Pfannanberg's 4th Generation Filterfan Series: Reduced Energy Consumption-More air, less power consumption, Patened Tool-less 4 corner fastening system, Highest system airflow in industry- via optimized louvres, 300% longer service time via patented fluted filter mat- this saves time and money, Aesthetically pleasing design using neutral colors- Perfect harmony of colors with modern machines and plants

Features of Pfannanberg's 4th Generation Filterfan Series: Reduced Energy Consumption-More air, less power consumption, Patened Tool-less 4 corner fastening system, Highest system airflow in industry- via optimized louvres, 300% longer service time via patented fluted filter mat- this saves time and money, Aesthetically pleasing design using neutral colors- Perfect harmony of colors with modern machines and plants

115VAC 4" Thermal Management Panel Fan

115VAC 6" Thermal Management Panel Fan

230VAC 6" Thermal Management Panel Fan

3242BTU/Hr 230VAC 0.52A 84W 7.87"X5.91"X19.68" ANSI 61 Gray Galvanized Sheet Steel NEMA 3R/4/12 Air/Water Heat Exchanger

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

With cooling capacities ranging from 2,218 BTU (650 Watts) to 34,121 BTU (10,000 Watts) the PWS Series Air to Water Heat Exchangers are specifically engineered to allow safe, efficient use of liquid coolant to cool enclosures electronics. Additionally the sloped horizontal cover surfaces and optional NEMA Type 4X stainless steel type rating make the PWS 3000 series perfect for wash-down applications. Heat exchangers are designed to draw hot air from the top of the enclosure and deliver cool air below the components. Closed Loop Design- Designed to isolate the external ambient air from the internal air circuit eliminating the risk of contaminants entering the cabinet. Push to Connect Fittings- Unlike a lot of competitors units that have rigid permanent connectors we use hydronic connectors that support quick connection to 1/2 Inch OD hose or 1/2 Inch ID with included adapters. Intelligent control of water flow- The adjustable electronic thermostat permits precise control of teh electrical enclosure temperature by regulating the coolant flow by activating a solenoid valve. This regulates the coolant flow to minimize coolant waste and increase energy-efficiency. Condensation Managment- Physical barriers allow for condensation to be collected and drained from the system with zero intrusion into the cabinet.

10W 110 to 250VAC 1A 1.16"X1.77"X2.95" 35MM DIN Rail Mount Mini Radiant Heater

20W 110 to 250VAC 1.1A 1.16"X1.77"X2.95" 35MM DIN Rail Mount Mini Radiant Heater

30W 110 to 250VAC 1.2A 1.16"X1.77"X2.95" 35MM DIN Rail Mount Mini Radiant Heater

10W 110 to 250VAC 1A 2.76"X1.97"X3.94" 35MM DIN Rail Mount Radiant Heater

15W 110 to 250VAC 1.1A 2.76"X1.97"X3.94" 35MM DIN Rail Mount Radiant Heater

30W 110 to 250VAC 1.2A 2.76"X1.97"X3.94" 35MM DIN Rail Mount Radiant Heater

45W 110 to 250VAC 1.8A 2.76"X1.97"X3.94" 35MM DIN Rail Mount Radiant Heater

60W 110 to 250VAC 2.5A 2.76"X1.97"X6.89" 35MM DIN Rail Mount Radiant Heater

75W 110 to 250VAC 4.5A 2.76"X1.97"X6.89" 35MM DIN Rail Mount Radiant Heater

100W 110 to 250VAC 5A 2.76"X1.97"X6.89" 35MM DIN Rail Mount Radiant Heater

150W 110 to 250VAC 7.5A 2.76"X1.97"X9.84" 35MM DIN Rail Mount Radiant Heater

250W 230VAC 1.1A 3.35"X4.09"X7.34" 35MM DIN Rail Mount Radiant Heater

250W 115VAC 2.2A 3.35"X4.09"X7.34" 35MM DIN Rail Mount Radiant Heater

400W 230VAC 1.8A 3.35"X4.09"X8.92" 35MM DIN Rail Mount Radiant Heater

400W 115VAC 3.6A 3.35"X4.09"X8.92" 35MM DIN Rail Mount Radiant Heater

400W 115VAC 9A 4"X5.375"X7.5" Panel Mount Fan Heater

800W 115VAC 14A 4"X5.375"X7.5" Panel Mount Fan Heater