L.S. Starrett

Versatile Indicator Holder Has Three Pivots Available For Positioning The Indicator Where Needed. Works With Any Indicator With A 3/8" (9.5mm) Stem (such As Our 25 And 650 And 651 Series) ; Works With Any Indicator With A Standard Dovetail Mount (such As Our 708, 709, And 811 Series) ; Works With Any Indicator With A 1/4" (6.3mm) Shank (such As Our 196 Series) ; Works With Any Indicator With A 3/16" (4.7mm) Shank (such As Our 708, 709, 811 And 711 Series) ; Works With Any Indicator With A Body Clamp (such As Our 711 Series) ; The Working Area Is Within A Hemisphere Having A Radius Of Approximately 12" (300mm)

Three Precision Ground, Magnetic Contact Surfaces. Grips Horizontally, Vertically Or Upside Down. V-step Holds Base To Round Surfaces. Extra #1/4-20 Tapped Hole In One Side Of Base (not Shown) For Mounting Post. Available With Or Without Starrett Agd Dial Indicators: Inch Reading 25-131j (graduation .0005", Dial Reading 0-25-0, Range .125") Or Millimeter Reading 25-181j (graduation 0.01mm, Dial Reading 0-50-0, Range 2.5mm).

?0073et Including Magnetic Base Base Has Three Precision Ground, Magnetic Contact Surfaces. Grips Horizontally, Vertically Or Upside Down. V-step Holds Base To Round Surfaces. Extra #1/4-20 Tapped Hole In One Side Of Base (not Shown) For Mounting Post. Available With Or Without Starrett Agd Dial Indicators: Inch Reading 25-131j (graduation .0005", Dial Reading 0-25-0, Range .125") Or Millimeter Reading 25-181j (graduation 0.01mm, Dial Reading 0-50-0, Range 2.5mm).

Angle Meter Provides Large Readable Scale For Accurate Readings From 0? To 90? In Any Quadrant. Integral Magnetic Base Frees Hands When Used On Ferrous Surfaces. Meter Measures Any Angle For Pitch Or Slope And Provides Handy Rise, Run, Angle And Pitch Information On Back Of The Tool.

The Starrett 440, 440m, 445, 445m Series Depth Micrometer Features A Combination Ratchet And Speeder, Ring-type Locknut, Ratchet Stop And Locknut. 0-6š Range, 2 1/2š Base, 6 Rods, Lock Nut, Case.

The Starrett 823 Tubular Inside Micrometer Set Features .001" Graduation, With 8 Rods, 4-32" Range, And 1" Movement Of Screw. 4-32š Range With 8 Rods, With Case.

The Starrett 436 Outside Micrometer Features A Ratchet Stop, Lock Nut, And Carbide Face With Case. 23-24š, .001š Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case.

Starrett 796.1 Electronic Micrometers Provide An Ip67 Level Of Protection Against Coolant, Water, Chips, Dirt, Dust, And Other Contaminants In Hostile Shop Environments. The 796.1 Electronic Micrometers Are Built With Customary Starrett Quality And Workmanship. 0-3" Range, With Friction Thimble, With Carbide Faces, Without Output.

Starrett 12" Combination Square With Square Head Features A Reversible Lock Bolt, Scriber, Spirit Level, And Hardened Steel, Photo-engraved Blade With Regular This Product Also Includes A Cast Iron Head With Black Wrinkle Finish. 12?002c00200034r Grad, Regular Blade

This Handy Product Includes Thickness Stock, Housed In Convenient Rewindable Dispenser Rolls. Having The Thickness Stock In A Case Makes It Very Useful For Cutting Off The Required Length For Adjusting Tappets, Spark Plugs, Distributor Points, Checking Bearing Clearances And Gear Play, Fitting Pistons, Rings And Pins, Gaging Narrow Slots, Etc. This Stock Is Also Useful For Shimming In Fixturing And Die Work.

This Handy Product Includes Thickness Stock, Housed In Convenient Rewindable Dispenser Rolls. Having The Thickness Stock In A Case Makes It Very Useful For Cutting Off The Required Length For Adjusting Tappets, Spark Plugs, Distributor Points, Checking Bearing Clearances And Gear Play, Fitting Pistons, Rings And Pins, Gaging Narrow Slots, Etc. This Stock Is Also Useful For Shimming In Fixturing And Die Work.

These Gages Are Widely Used In Automotive, Aviation, Diesel And Farm Equipment Manufacture And Service And Also In Jig, Fixture, Gage And Experimental Work. .001?002c002000312?0020004c0065ngth.

Tester provides reliable Rockwell Hardness values on all types of metal and alloys, hard or soft, and in many shapes. conforms to ASTM E-18 standard. The tester is furnished with a diamond indentor, a 1/16" (1.6mm) ball indentor, three certified test blocks, four test tables 5.87" (149mm) and 2.5" (63.5mm) flat anvils, 5/8" (15.9mm) spot anvil and a standard vee anvil and an accessory case.

Versatix MP is a bi-metal blade of triple-tempered, high-speed M-42 cobalt steel teeth with alloy steel backing strip. It has a patented tooth design that dissipates stress during cutting for less tooth breakage and longer blade life. Its special set minimizes pinching when cutting structurals and bundles. They are ideal for sawing structurals, tubes and small solids and pull-down, gravity fed machines with uncontrolled feed rates.

Versatix MP is a bi-metal blade of triple-tempered, high-speed M-42 cobalt steel teeth with alloy steel backing strip. It has a patented tooth design that dissipates stress during cutting for less tooth breakage and longer blade life. Its special set minimizes pinching when cutting structurals and bundles. They are ideal for sawing structurals, tubes and small solids and pull-down, gravity fed machines with uncontrolled feed rates.

Carbide Face, Knurled Ring, Ratcheting Thimble

Outside Micrometer features ratchet stop, lock nut, and carbide face. .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces

Wide range of use in layout, gaging, inspection work and for setups on various machine tools. Their adjustable feature makes it possible to adjust them to exact size by micrometer measurement and also permits use in place of several solid-type parallels. These parallels are useful as gages in checking the size of slots and openings. They are also convenient for use in machine vises, for leveling or adjusting work on setups of milling and grinding machines, shapers, planers, drill presses and for many other applications. Parallels slide smoothly and can be easily adjusted. The smaller sizes A, B, and C, are locked by one screw while the larger sizes, D, E, and F, have two lock screws. All parallels are 9/32" (7mm) thick. 3 9/16" (90mm) Length, 15/16-1 5/16" (24-33mm) Range All parallels are 9/32" (7mm) thick.

Dial Indicator; Type Jewel Bearing, Lug On Center Back; Display Type Analog; Total Range 4 Inch; Range Per Revolution 0.1 Inch; Dial Diameter 2-1/4 Inch; Stem Length 2-13/16 Inch; Stem Diameter 0.375 Inch; Dial Reading 0-100; Graduation 0.001 Inch; Dial Color White

The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 3 in (75mm) Length, 1/16 in (1.5mm) Point Diameter.

Micrometer Level; Type Adjustable; Length 8 Inch; Material Brass; Finish Satin Chrome

Micrometer Level; Type Adjustable; Length 12 Inch; Material Brass; Finish Satin Chrome

Combination Square; Type Square Head; Blade Length 12 Inch; Graduation No.4r; Head Material Forged Hardened Enamel Black Finished Steel

The Starrett 22C Drill Point Gage is designed specifically for use in drill grinding. It provides a quick, accurate way for determining the correct drill point angle of 59 Degree and the correct length of drill lips necessary for clean-cut drilling at maximum feeds and speeds. 59 Degree Bevel, 32nds Graduation

Dial-Reading Solid-Rod Inside Micrometer, Range 6 inch to 78 inch, Resolution 0.001 inch, SPC Output No, Movement of Screw 2 inch, Inside Micrometer Type Tubular-Rod Inside Micrometer, Number of Measuring Rods 9, Number of Micrometers 1, Operation Type Mechanical, Thimble Type Plain, Case Included Yes, Case Type Wood Case, Contact Point Material Steel, Contact Point Shape Curved