5 /3.8/2.5KW @ 208V Commercial Fan Forced Ceiling Heater (inner frame only)
Use,Commercial, Industrial;Number of Phases,1, 3;Heating Capacity,8.5 BTU/HR Low Speed, 13 BTU/HR Medium Speed, 17.1 BTU/HR High Speed;Housing Size,20" L x 16-1/2" W x 5-3/4" D;Material,20 Gauge Steel;Finish,Galvanized;Heating Element,Brazed Steel Finned Steel Sheathed Nichrome Wire;Control Type,Built-In Fan Delay, Thermostat, Automatic Thermal Cutout, Disconnect Switch and Interlock Relay;Fan/Motor Type,Permanently Lubricated Totally Enclosed Rotor;Air Flow Rate,300 CFM;Mounting,Ceiling/Surface;Approval,UL, UL (Canada and US)
Brand
Berko by Marley
Mfr. Part#
FFCH558
Customer Part#
Campbell Part#
BERFFCH558
| Air Flow Rate | 300 CFM |
|---|---|
| Approval | UL, UL (Canada and US) |
| Control Type | Built-In Fan Delay, Thermostat, Automatic Thermal Cutout, Disconnect Switch and Interlock Relay |
| Fan/Motor Type | Permanently Lubricated Totally Enclosed Rotor |
| Finish | Galvanized |
| Heating Capacity | 8.5 BTU/HR Low Speed, 13 BTU/HR Medium Speed, 17.1 BTU/HR High Speed |
| Heating Element | Brazed Steel Finned Steel Sheathed Nichrome Wire |
| Housing Size | 20" L x 16-1/2" W x 5-3/4" D |
| Material | 20 Gauge Steel |
| Mounting | Ceiling/Surface |
| Number of Phases | 1, 3 |
| Use | Commercial, Industrial |
Specification Sheet