Hole & Slot Gage Sets

Telescoping Gauge Set; Item Telescoping Gauge; Set Content (2) Telescoping Arm, (6) Telescoping Gage With Individual Measuring Range Of 5/16 To 1/2 Inch, 1/2 To 3/4 Inch, 3/4 To 1-1/4 Inch, 1-1/4 To 2-1/8 Inch, 2-1/8 To 3-1/2 Inch, 3-1/2 To 6 Inch; Set Measuring Range 5/16 To 6 Inch; Handle Length 2-3/8 To 3-1/4 Inch

Telescoping Gage Set; Item Telescoping Gage Set; Set Content Telescoping Gauge With Individual Range Of 5/16 To 1/2 Inch, 1/2 To 3/4 Inch, 3/4 To 1-1/4 Inch, 1-1/4 To 2-1/8 Inch, 2-1/8 To 3-1/2 Inch, 3-1/2 To 6 Inch; Set Measuring Range 5/16 To 6 Inch; Finish Satin Chrome

Small Hole Gage Set; Item Small Hole Gage Set; Set Content Telescoping Gauge With Individual Range Of 0.125 To 0.2 Inch, 0.2 To 0.3 Inch, 0.3 To 0.4 Inch, 0.4 To 0.5 Inch; Set Measuring Range 0.125 To 0.5 Inch; Finish Satin Chrome

The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle.

The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle.

The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle.

The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle.

The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle.

The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle.

The Starrett 579 Telescoping Gage is used for determining the true size of holes, slots, and recesses up to 6" (150mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly rocked in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. 1/2-3/4" (13-19mm) Range, 8" (200mm) Handle.