Metalworking Fluids & Coolants

A cutting fluid that is great for all metals including aluminum. Does not contain chlorinated solvents, chlorinated paraffins, water, or inactive fillers; safe to use on metals and aluminum. Requires less product usage than traditional cutting fluids.

A heavy duty and versatile formula that performs incredibly on all metals and in any operation. Highly effective for drilling, tapping, milling - all cuts on all metals. This is the fluid to have when you don't know what cut or what metal tomorrow may bring. Flash Point 300 Deg F; Color Yellow; Odor Mild Sulfur

Machine shop operators use to scribe sharp, clear, precise lines. Provide a uniform deep blue color that prevents glare and dries in minutes. Creates an extremely thin film which adds practically no thickness to the work piece and remains flexible without cracking and chipping. Drying Time 2 Min; Boiling Point 76.667 to 125 Deg C; Flash Point 53 Deg F

Steel Blue provides a uniform deep color that prevents glare and eye strain; Allows for sharp, clear, and precise scribes; Provides a thin film without cracking/chipping and adds practically no thickness to work surface

Removes layout fluids from metal surfaces; Dries in minutes; Does not contain toluene or chlorinated solvents; Leaves no residue

A cutting fluid that is great for all metals including aluminum. Does not contain chlorinated solvents, chlorinated paraffins, water, or inactive fillers; safe to use on metals and aluminum. Requires less product usage than traditional cutting fluids.

Cutting Oil is a superior thread cutting lubricant for use on all types of metals, including brass, copper and aluminum. Temperature Range 300 Deg F; Odor Light petroleum; Color Brown; Application Pipe, Conduit, Screw, Bolt Hole, Housing, Aluminum Sheet, Gear and Chain

Steel Blue provides a uniform deep color that prevents glare and eye strain; Allows for sharp, clear, and precise scribes; Provides a thin film without cracking/chipping and adds practically no thickness to work surface

Tap Magic Aluminum is the cutting fluid of choice for any work on aluminum, brass, copper, and other soft metals. Unlike some other fluids on soft metals, it will not stain the surface of the work. Precision is always excellent and the finish is always superb. Item Type Drilling, Milling, Facing, Broaching, Boring, Turning, Tapping, Engraving, Reaming, Threading, Sawing. Flash Point 185 Deg F; Boiling Range 370 to 560 Deg F; Color Light Yellow; Odor Pleasant;

Excellent in applications where cooling of the tool is desired. Corrosion inhibitors prevent flash rusting and provides fine finishes. A water-based cutting fluid that does not contain sulfur, chlorine or chlorinated solvents. Canadian Forces Approval # 18455, Caterpillar Approval # 3-9871446 & 3-9871450, Ford Motor Co. TOX # 125841

Prepares surfaces for better adhesion of layout fluids and removes layout fluids when project is complete. Does not contain toluene or chlorinated solvents. Color Clear; Drying Time 30 Sec; Boiling Point 56.11 Deg C

The biodegradable, solid bar lubricant excellent for belt, wheel and disc grinding, or sawing applications. Eliminates heat build-up and belt loading

Safe on most surfaces, Removable with DYKEM, Remover & Cleaner, Surface tests should be run to determine compatibility prior to use

Cutting Fluid; Brand Name CIMCOOL, CIMSTAR; Item Type Machining, Grinding; Container Type Pail; Container Size 5 Gallon; Freezing Point 32 Deg F; Boiling Point 210 Deg F; Color Pink, Blue; Odor Chemical; Physical Form Liquid; Gravity 1.058; PH 10.2; Used On Material Cast Iron, Nodular Iron, Carbon Steel, High Speed Steel, High Alloy Steel, Stainless Steel, Aluminum

A heavy duty and versatile formula that performs incredibly on all metals and in any operation. Highly effective for drilling, tapping, milling - all cuts on all metals. This is the fluid to have when you don't know what cut or what metal tomorrow may bring. Flash Point 300 Deg F; Color Yellow; Odor Mild Sulfur

Formula "77" provides excellent service in most general purpose flood cooling applications. One coolant-Formula "77" - will fill most of your general mist and flood coolant needs. Formula "77" eliminates double coolant inventory, cuts storage space requirements and reduces your costs.

Excellent in applications where cooling of the tool is desired. Corrosion inhibitors prevent flash rusting and provides fine finishes. A water-based cutting fluid that does not contain sulfur, chlorine or chlorinated solvents. Canadian Forces Approval # 18455, Caterpillar Approval # 3-9871446 & 3-9871450, Ford Motor Co. TOX # 125841

A cutting fluid that is great for all metals including aluminum. Does not contain chlorinated solvents, chlorinated paraffins, water, or inactive fillers; safe to use on metals and aluminum. Requires less product usage than traditional cutting fluids.

A heavy duty and versatile formula that performs incredibly on all metals and in any operation. Highly effective for drilling, tapping, milling - all cuts on all metals. This is the fluid to have when you don't know what cut or what metal tomorrow may bring. Flash Point 300 Deg F; Color Yellow; Odor Mild Sulfur

The high-performance, biodegradable, naturally organic cutting fluid. Does not contain sulfur, chlorine, chlorinated solvents, water, mineral oil, or inactive fillers. Canadian Forces Approval # 18452, Ford Motor Co. TOX # 134612 (all sizes), PPG Glass Co. Approval # 014-598-1000; 176 Deg C (350 Deg F) flash point

Provides maximum lubrication, reduces friction, and results in minimal wear. It is excellent for general and severe machining operations on hard metals such as stainless steel and carbon steels as well as on soft metals such as aluminum. It is ideal for low-speed operations that require high physical lubricity, including broaching, drilling, lathing, milling, tapping and gear-cutting. Leaves a temporary, rust-inhibiting coating on tools and freshly cut metal surfaces.

A versatile product used on a wide variety of operations to provide one fluid to meet most metalworking requirements. Applications Machining, Grinding, Turning, Drilling, Tapping, Reaming, Gear Cutting, Broaching; Flash Point 380 Deg F; Fire Point 400 Deg F; Freezing point 28 Deg F; Color Blue; Physical Form Liquid; Used On Material Carbon Steel, High Speed Steel, Cast Steel, Alloy Steel, Tool Steel, Stainless Steel, Cast Iron, Aluminum, Bronze, Brass, Copper Metal

A metal-cutting fluid safe for tapping, drilling, reaming, threading or finishing on aluminum. Improves surface finish and extends tool life. Reduces friction and eliminates chip welding.

A metal-cutting fluid safe for tapping, drilling, reaming, threading or finishing on aluminum. Improves surface finish and extends tool life. Reduces friction and eliminates chip welding.

The biodegradable, cream formula cutting lubricant that does not contain chlorinated solvents or petroleum distillates. Can be applied to tools before tapping or reaming. Can be used for tapping, forming, bending, pre-coating fasteners and lubricating rubber seals.

Excellent in applications where cooling of the tool is desired. Corrosion inhibitors prevent flash rusting and provides fine finishes. A water-based cutting fluid that does not contain sulfur, chlorine or chlorinated solvents. Canadian Forces Approval # 18455, Caterpillar Approval # 3-9871446 & 3-9871450, Ford Motor Co. TOX # 125841

Designed to effectively lubricate severe metalworking operations. TriCut flows directly on the cutting edge, providing lubrication to improve cutting performance. Suitable for high and low speed applications. Excellent for stainless steel and other hard to machine metals. Not recommended for aluminum

Designed to effectively lubricate severe metalworking operations. TriCut flows directly on the cutting edge, providing lubrication to improve cutting performance. Suitable for high and low speed applications. Excellent for stainless steel and other hard to machine metals. Not recommended for aluminum

A cutting fluid that is great for all metals including aluminum. Does not contain chlorinated solvents, chlorinated paraffins, water, or inactive fillers; safe to use on metals and aluminum. Requires less product usage than traditional cutting fluids.

The high-performance, biodegradable, naturally organic cutting fluid. Does not contain sulfur, chlorine, chlorinated solvents, water, mineral oil, or inactive fillers. Canadian Forces Approval # 18452, Ford Motor Co. TOX # 134612 (all sizes), PPG Glass Co. Approval # 014-598-1000; 176 Deg C (350 Deg F) flash point

The high-performance, biodegradable, naturally organic cutting fluid. Does not contain sulfur, chlorine, chlorinated solvents, water, mineral oil, or inactive fillers. Canadian Forces Approval # 18452, Ford Motor Co. TOX # 134612 (all sizes), PPG Glass Co. Approval # 014-598-1000; 176 Deg C (350 Deg F) flash point

Machine shop operators use to scribe sharp, clear, precise lines. Provide a uniform deep red color that prevents glare and dries in minutes. Creates an extremely thin film which adds practically no thickness to the work piece and remains flexible without cracking and chipping. Drying Time 2 Min; Boiling Point 76.667 to 125 Deg C; Flash Point 53 Deg F

Layout Dye; Brand Name DYKEM, Steel Blue; Type Liquid; Container Type Bottle; Container Capacity 1 Quart; Color Blue; Drying Time 2 Min; Boiling Point 76.667 to 125 Deg C; Flash Point 53 Deg F

Prepares surfaces for better adhesion of layout fluids and removes layout fluids when project is complete. Does not contain toluene or chlorinated solvents. Color Clear; Drying Time 30 Sec; Boiling Point 56.11 Deg C

A heavy duty and versatile formula that performs incredibly on all metals and in any operation. Highly effective for drilling, tapping, milling - all cuts on all metals. This is the fluid to have when you don't know what cut or what metal tomorrow may bring. Flash Point 300 Deg F; Color Yellow; Odor Mild Sulfur

Tap Magic Aluminum is the cutting fluid of choice for any work on aluminum, brass, copper, and other soft metals. Unlike some other fluids on soft metals, it will not stain the surface of the work. Precision is always excellent and the finish is always superb. Item Type Drilling, Milling, Facing, Broaching, Boring, Turning, Tapping, Engraving, Reaming, Threading, Sawing. Flash Point 185 Deg F; Boiling Range 370 to 560 Deg F; Color Light Yellow; Odor Pleasant;

Tap Magic Aluminum is the cutting fluid of choice for any work on aluminum, brass, copper, and other soft metals. Unlike some other fluids on soft metals, it will not stain the surface of the work. Precision is always excellent and the finish is always superb. Item Type Drilling, Milling, Facing, Broaching, Boring, Turning, Tapping, Engraving, Reaming, Threading, Sawing. Flash Point 185 Deg F; Boiling Range 370 to 560 Deg F; Color Light Yellow; Odor Pleasant;

Tap Magic Aluminum is the cutting fluid of choice for any work on aluminum, brass, copper, and other soft metals. Unlike some other fluids on soft metals, it will not stain the surface of the work. Precision is always excellent and the finish is always superb. Item Type Drilling, Milling, Facing, Broaching, Boring, Turning, Tapping, Engraving, Reaming, Threading, Sawing. Flash Point 185 Deg F; Boiling Range 370 to 560 Deg F; Color Light Yellow; Odor Pleasant;

Slick-StikLubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage.