Search results for: 'Satco'

T8 LED retrofit tube replaces a 25 to 32 watt T8 flourescent tube. A ballast is required to run this tube, check ballast compatibility chart to insure operation. Check ballast for dimmer compatibility. Max operating temperature of 113 F.

Replaces 100 watt incandescent. Non-Dimmable LED Bulb has a medium base natural white color temperature. Produces 1600 lumens of light at a 220 degree beam angle.

Lumens: 750; Wattage: 9.5 Watt; Kelvin Temperature: 2700k; Dimmable: Yes; Average Life (hrs): 25000; Shape: Br30; Cri: 80; Base: Medium; Voltage: 120

14-watt, 48 inch, T8 LED bulb is an energy efficient lighting solution for a variety of applications. Retail spaces, hospitals, and educational venues can all realize the immediate benefits and savings LED lighting offers.

T5 LED retrofit tube replaces a 54 watt Hi output flourescent tube. This tube is ballast bypass with single or double ended wiring. It is non-dimmable with a frosted glass lens and a max operating temperature of 113 F.

9.5-watt LED lamp is traditional, yet contemporary with its sleek finish and energy saving LED technology. Elegantly illuminate any room in the house with this frosted bulb. Sophisticated and modern, this lamp delivers 15,000 hours of warm white light.

11.5 Watt; LED BR40; 2700K; 103 deg. Beam Angle; Medium base; 120 Volt; Dimmable

10 watt C7 Incandescent; Clear; 2500 average rated hours; 60 lumens; DC Bay base; 130 volts

The bulb's instant start design allows the lamp to immediately light up with no flickering or noise. Use this light bulb in your commercial kitchen, office, or hospitality service!

9.5-watt LED lamp is traditional, yet contemporary with its sleek finish and energy saving LED technology. Elegantly illuminate any room in the house with this frosted bulb. Sophisticated and modern, this lamp delivers 15,000 hours of natural white light.

15.5 Watt; A19 LED; 2700K; Medium base; 220 deg. Beam Angle;120 Volt

T8 LED retrofit tube replaces a 32 watt T8 flourescent. This tube is ballast bypass with double ended wiring. It is non-dimmable with a max operating temperature of 113 F.

11.5 Watt; A19 LED; 5000K; Medium base; 220 deg. Beam Angle;120 Volt

Ballast by-pass - Double ended wiring, No ballast or external driver required, Direct wire 120-277V line voltage, All glass tube, Shatterproof coated - NSF approved, 40W; 59W Fluorescent equivalency, 43 watt T8 LED; Single pin base; 5000K; 50000 average rated hours; 5500 lumens

This easy to install, efficient LED surface mount fixture is perfect for so many applications. Selectable color temperature at 3000K, 4000K or 5000K means you will deliver superior light almost anywhere, including kitchens, baths, hallways, closets and offices.

Indoor LED shop light that is non-dimmable. Can daisy chain multiple of these fixtures together via power cord.

Replaces 75 watt incandescent. Non-Dimmable LED Bulb has a medium base natural white color temperature. Produces 1100 lumens of light at a 220 degree beam angle.

Long life; A shaped replacement lamp; Dimmable; Approved for enclosed fixtures; Replaced the S9837

White Finish 2.59 Inches High 5.5 Inches Wide LED - 40 Watt Linear LED Module Bulbs, Weight: 4.32 LBS, Interior Damp Rated

18.5 Watt; A21 LED; Frost Finish; Medium base; 5000K; 120 Volt

A-Shaped replacement lamp; 100W equivalent; Long life: 15,000 hours; Damp location rated; Approved for enclosed fixtures

Damp location rated for indoor use; FCC and RoHS compliant; Rated for 25,000 hours

20W LED Small Wall Pack is now CCT Selectable. Available in three finishes and featuring lighting choices from warm, cool, and natural light, this fixture is perfect for all of your lighting needs. This premium Wall Pack has a built in photocell sensor, a 100 degree beam spread, and is IP65 wet location rated making it the ideal addition to commercial buildings for exterior illumination.

11.5 Watt; A19 LED; 3000K; Medium base; 220 deg. Beam Angle;120 Volt

LED 4' Strip Light - 24 Watt - White Finish - 100-277 Volts

Beam Spread - Closed 260 Degree; Partial 150 degree; Open 120 Degree, Rated For Enclosed Fixture, Damp Location IP Rating - IP64

LED Hybrid T8 - Type A + Type B. Direct replacement or by-pass, System Performance: Ballast Compatible bare lamp is 12W; Ballast Bypass 13W, Solid state LED lighting, High efficacy, DLC Listed, Do not use with dimmers in by-pass mode. Check the ballast for dimming capability when using with a ballast. NSF Approved, PET coated glass tube, Protection from arcing, Bypass mode works wired as a single ended lamp on non-shunted sockets or as a double ended lamp on either shunted or non-shunted sockets

Satco's 48" (4 Foot) LED sign tube - part number S16404 (18T8/LED/HO-SIGN/48-840/BP). These LED retrofit tubes DO NOT require an external LED driver. The existing ballast must be bypassed. The S16404 delivers 2300 lumens of 4000K Cool White and runs on the universal voltage of 120-277V. For a 6500K Daylight option, please refer to the related products below. This tube consumes just 18 watts, for a total of 127 lumens per watt.

All glass tube, Direct wire 120-277V line voltage, NSF Approved, No ballast or external driver required, Built-in shock resistant circuit - (not hot until both ends are installed)

Replaces 75 watt incandescent. Dimmable LED Bulb has a medium base natural white color temperature. Produces 1100 lumens of light at a 220 degree beam angle.

LED 2' Connectable Strip - 24 Watt - 4000K - White Finish - 120 Volts

CCT Selectable; 0-10V Dimmable; Maintenance free - no bulb to change; Die-cast aluminum body; IP65, Wet rated for outdoor use; UV Stabilized Powder Coated Finish

Constructed from die cast aluminum with a polycarbonate lens; Capable of being dimmed; Rated for installation in wet locations; Adjustable head; For use in commercial settings; Integrated 30 watt LED lighting

Solid State LED lighting; Long life; A shaped replacement lamp; Dimmable; Approved for enclosed fixtures

T5 LED retrofit tube replaces a 54 watt Hi output flourescent tube. This tube is ballast bypass compatible. Integrated thermal fuse at pins.

(100W/LED/HID/5000K/100-277V/EX39) High Lumen Omni-directional LED for Industrial / Commercial applications, Replaces HID, CFL, and Incandescent, Ballast by-pass - Direct wire only 100V - 277V, UL approved for totally enclosed fixtures, Damp location - IP65 rated, For outdoor & indoor use, DLC Listed, Base up, base down or horizontal operation, Emits no UV light / Contains no mercury (Hg), Non-Dimmable

Item Size: Length: 22. 00 inches Width: 1. 00 inches; Style: Transitional Light Type

Direct wire 120-277V line voltage, Double ended wiring, No ballast or external driver required, All glass tube, Shatterproof coated, NSF certified, 40 watt T8 LED; 5000K; Recessed Double Contact base; 50000 Average rated hours; 5500 Lumens

Ballast by-pass - Double ended wiring, No ballast or external driver required, Direct wire 120-277V line voltage, All glass tube, Shatterproof coated - NSF approved, 54W; 59W Fluorescent equivalency, 43 watt T8 LED; Single pin base; 4000K; 50000 average rated hours; 5500 lumens

Direct Replacement - for use on Instant Start and Rapid Start ballasts with no rewiring required, Solid State LED lighting, High efficiency, DLC Listed, All glass tube